SIC issues from R80.40 management to 1570R

RalphLopez — Mon, 03 Aug 2020 16:43:51 GMT

Does anyone have access to and success with adding a 1570R to central management?

When I try to add a 1570R to my management server, I am running into a SIC issue. I know that I have to add this particular model as a 1590 when creating it, since there is no 1570R currently.

The error I get is this:

Trust says established but yet no topology occurs and the error about the DN, which is in a reverse for of what IP scheme I assgned the LAN IP address on the 1570R during initial setup. I have tried factory default of the appliance and if I assign a different IP on the LAN side, the error will reflect the same invalid DN when I try to establish SIC again.

The management server is in a multi-domain system with the following cpinfo:

This is Check Point CPinfo Build 914000202 for GAIA
[IDA]
No hotfixes..

[MGMT]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

[CPFC]
No hotfixes..

[FW1]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

FW1 build number:
This is Check Point Security Management Server R80.40 - Build 019
This is Check Point's software version R80.40 - Build 088

[SecurePlatform]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

[AutoUpdater]
No hotfixes..

[NGXCMP]
No hotfixes..

[SFWCMP]
No hotfixes..

[SFWR75CMP]
No hotfixes..

[SFWR77CMP]
No hotfixes..

[SFWR80CMP]
No hotfixes..

[FLICMP]
No hotfixes..

[R75CMP]
No hotfixes..

[R7520CMP]
No hotfixes..

[R7540CMP]
No hotfixes..

[R76CMP]
No hotfixes..

[R77CMP]
No hotfixes..

[PROVIDER-1]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

[Reporting Module]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

[SmartLog]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

[CPinfo]
No hotfixes..

[VSEC]
HOTFIX_R80_40_JUMBO_HF_MAIN Take: 48

[DIAG]
No hotfixes..

[MGMTAPI]
No hotfixes..

[CPUpdates]
BUNDLE_INFRA_AUTOUPDATE Take: 33
BUNDLE_DEP_INSTALLER_AUTOUPDATE Take: 17
BUNDLE_R80_40_JUMBO_HF_MAIN Take: 48

[CPDepInst]
No hotfixes..

Re: SIC issues from R80.40 management to 1570R

HristoGrigorov — Tue, 04 Aug 2020 07:17:13 GMT

Sounds like a case for TAC

Re: SIC issues from R80.40 management to 1570R

G_W_Albrecht — Wed, 05 Aug 2020 06:26:21 GMT

Could be the MTU issue from sk98474: Verify the routing between Gateway and Management Server and also the return path. Match the MTU size between the network devices and the SMB Appliance.

topic SIC issues from R80.40 management to 1570R in Spark Firewall (SMB)

SIC issues from R80.40 management to 1570R

Re: SIC issues from R80.40 management to 1570R

Re: SIC issues from R80.40 management to 1570R