topic Re: 1550 sub vlan interface in Spark Firewall (SMB)

1550 sub vlan interface

nflnetwork29 — Tue, 31 Mar 2020 20:02:14 GMT

Does anyone know if the 1550 model supports the creation of Sub VLAN interfaces (SVI) on the physical interfaces?

thank you

Re: 1550 sub vlan interface

Vladimir — Tue, 31 Mar 2020 20:09:21 GMT

It should, especially since it was supported on the older, 1400 series:

Re: 1550 sub vlan interface

Danh — Sun, 05 Apr 2020 11:48:59 GMT

If by SVI you mean the ability to define a few VLANs on the same physical port and use IP routing between them, then yes it is supported on the 1500 series.

Re: 1550 sub vlan interface

patnaik1010 — Tue, 09 Jun 2020 18:45:18 GMT

Hello There,

I have Model 1550 appliance and I have two network segments and one wan connection. Is it possible to configure NAT between two LAN network segments.

LAN Network 1 - 192.168.100.x /24

LAN Network 2 - 10.7.100.x /24 - Port 5 from LAN port configured with IP address

WAN Network - 192.168.0.x /24 - Configured on WAN Port

If any configuration document available to configure intervlan routing & sub vlan interfaces ,please share for reference.

Thanks

Srinivas Patnaik

Re: 1550 sub vlan interface

G_W_Albrecht — Wed, 10 Jun 2020 10:25:59 GMT

Here: 1500 Appliance Series R80.20 Locally Managed Administration Guide p.50ff - Configuring the Local Network