topic Re: Show Configuration - 1490 Appliance in Spark Firewall (SMB)

Show Configuration - 1490 Appliance

Lenin_Ramirez — Thu, 13 Feb 2020 20:41:25 GMT

Good Afternoon Team,

Question

I´m going to revert an 1490 appliance to a fabric status and I need the "show configuration" of this device. Into it I see all the objects policies...

Question, When I reset to a fabric status. Is it possible I can export this configuration in order to create again objects and so on.

Thanks

Lenin

Re: Show Configuration - 1490 Appliance

PhoneBoy — Thu, 13 Feb 2020 21:21:51 GMT

show configuration may miss a few items that aren't configurable via the CLI.
Also, when the output of show configuration is then reinput as it was output, a few items may not work correctly due to command ordering issues.
The only way to be sure you've got everything is to create a proper backup.
This is done in the WebUI via Device > System > System Operations.

Re: Show Configuration - 1490 Appliance

Tom_Hinoue — Fri, 14 Feb 2020 00:28:37 GMT

We have an sk about the limitation PhoneBoy mentioned regarding "show configuration" 🙂

SK164018 - Missing configuration items in output of the 'show configuration' command on SMB appliances
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk164018

Re: Show Configuration - 1490 Appliance

G_W_Albrecht — Fri, 14 Feb 2020 09:17:02 GMT

Configuration transfer between different SMB models