topic Re: Auto-redirect WebUI from 80 to 4434 port in Spark Firewall (SMB)

Auto-redirect WebUI from 80 to 4434 port

PavelSpiridonov — Mon, 10 Nov 2025 14:45:04 GMT

Hi!

How do I disable automatic redirection to port 4434 from 80 port when accessing WebUI devices on CP1575 R81.10.17?

Re: Auto-redirect WebUI from 80 to 4434 port

the_rock — Mon, 10 Nov 2025 18:54:38 GMT

Try this from clish:

set web-http-redirect disable, then save config

Re: Auto-redirect WebUI from 80 to 4434 port

the_rock — Mon, 10 Nov 2025 19:26:14 GMT

@PavelSpiridonov

Scrap my last update, command does not work, option not there. Let me see if clish settng exist, but what do you have configured in what I attached?

Re: Auto-redirect WebUI from 80 to 4434 port

the_rock — Mon, 10 Nov 2025 19:49:38 GMT

See if below post helps. Appears this is indeed expected.

https://community.checkpoint.com/t5/SMB-Gateways-Spark/how-to-disable-redirect-to-4434-stop-listening-to-port-80/td-p/221843

Re: Auto-redirect WebUI from 80 to 4434 port

PavelSpiridonov — Wed, 12 Nov 2025 13:41:33 GMT

In my case, this didn't work:
creating file $FWDIR/boot/modules/fwkern.conf with line multi_portal_allow_redirect=0 didn't help,
comment line #define ENABLE_PORTAL_HTTP_REDIRECT in file /$FWDIR/lib/implied_rules.def also didn't help.
Perhaps I'm editing file implied_rules.def in the wrong path?

Re: Auto-redirect WebUI from 80 to 4434 port

the_rock — Wed, 12 Nov 2025 13:53:12 GMT

Based on the link I sent you, it is expected behavior. Btw, you are modifying right implied rules file, thats the only one, I believe. Did you comment out # sign?

Re: Auto-redirect WebUI from 80 to 4434 port

PavelSpiridonov — Thu, 13 Nov 2025 06:14:37 GMT

Yes, of course I commented out the whole line, including #

Re: Auto-redirect WebUI from 80 to 4434 port

the_rock — Thu, 13 Nov 2025 12:07:24 GMT

Fair enough. Did you ever end up opening TAC case?

Re: Auto-redirect WebUI from 80 to 4434 port

PavelSpiridonov — Fri, 14 Nov 2025 05:02:21 GMT

I was sure it was a simple option with a known solution. But I'll try open TAC case.

Thanks.

Re: Auto-redirect WebUI from 80 to 4434 port

the_rock — Fri, 14 Nov 2025 12:13:48 GMT

I still have a gut feeling this is actrually expected, based on the link I shared by Phoneboy.