topic Re: High avaibility 1200R checkpoint in Spark Firewall (SMB) https://community.checkpoint.com/t5/Spark-Firewall-SMB/High-avaibility-1200R-checkpoint/m-p/32102#M1319 <HTML><HEAD></HEAD><BODY><P>Have you opened a case with the TAC by chance?</P></BODY></HTML> Wed, 20 Jun 2018 20:03:53 GMT PhoneBoy 2018-06-20T20:03:53Z High avaibility 1200R checkpoint https://community.checkpoint.com/t5/Spark-Firewall-SMB/High-avaibility-1200R-checkpoint/m-p/32101#M1318 <HTML><HEAD></HEAD><BODY><P>Hello, i have some problems with my firewall 1200R checkpoint.</P><P></P><P>I have two firewall 1200R in HA with ClusterXL.</P><P>Visibly, it's work. And i have too configure two interfaces to get internet. The interfaces WAN and DMZ.</P><P></P><P>I configure them in mode high-avaiblitiy for internet connection and in HA with ClusterXL between the two firewall.</P><P>Moreover, i use OSPF on these two interfaces.</P><P></P><P>When i start my cluster with my configuration i get OSPF route on interface WAN. That's work on the two firewall of the cluster.</P><P>But if i disconnect the interface WAN of the two firewall, impossible to get OSPF route.</P><P>If i want to come back to the intitial state, that's to say to get OSPF route on the interface WAN, i need to reboot the cluster.</P><P></P><P>I have the same configuration on the interface WAN and DMZ.</P><P></P><P>What i'm doing wrong ?</P></BODY></HTML> Mon, 18 Jun 2018 11:12:01 GMT https://community.checkpoint.com/t5/Spark-Firewall-SMB/High-avaibility-1200R-checkpoint/m-p/32101#M1318 george_delatour 2018-06-18T11:12:01Z Re: High avaibility 1200R checkpoint https://community.checkpoint.com/t5/Spark-Firewall-SMB/High-avaibility-1200R-checkpoint/m-p/32102#M1319 <HTML><HEAD></HEAD><BODY><P>Have you opened a case with the TAC by chance?</P></BODY></HTML> Wed, 20 Jun 2018 20:03:53 GMT https://community.checkpoint.com/t5/Spark-Firewall-SMB/High-avaibility-1200R-checkpoint/m-p/32102#M1319 PhoneBoy 2018-06-20T20:03:53Z