topic Re: Can I get devices that expect wps to connect to a 600 series appliance? in Spark Firewall (SMB) https://community.checkpoint.com/t5/Spark-Firewall-SMB/Can-I-get-devices-that-expect-wps-to-connect-to-a-600-series/m-p/6887#M123 <HTML><HEAD></HEAD><BODY><P>I assume by WPS you mean WiFi-Protected Setup.</P><P>WPS is not supported by the 600/700/1100/1200R/1400 series because it's not secure.</P><P>The devices will need to be configured manually to connect to your WiFi network (or you need to configure it to be open).</P><P>I would allow the device to connect to the network first before you enable MAC filtering.</P><P>Then you can validate in Home &gt; Monitoring &gt; Active Computers to see what devices are actually connected.</P></BODY></HTML> Sat, 30 Sep 2017 04:11:01 GMT PhoneBoy 2017-09-30T04:11:01Z Can I get devices that expect wps to connect to a 600 series appliance? https://community.checkpoint.com/t5/Spark-Firewall-SMB/Can-I-get-devices-that-expect-wps-to-connect-to-a-600-series/m-p/6886#M122 <HTML><HEAD></HEAD><BODY><P>I have a 640 that I am using in a domestic situation and I have a couple of devices that expect to connect to WIFI using WPS.&nbsp; My first attempt was to set up a guest wifi locked down by MAC address but I could not get the devices to connect.</P><P></P><P>Any thing else I should try?</P><P></P><P>Thanks, Russell</P></BODY></HTML> Sat, 30 Sep 2017 00:06:41 GMT https://community.checkpoint.com/t5/Spark-Firewall-SMB/Can-I-get-devices-that-expect-wps-to-connect-to-a-600-series/m-p/6886#M122 Russell_Fulton 2017-09-30T00:06:41Z Re: Can I get devices that expect wps to connect to a 600 series appliance? https://community.checkpoint.com/t5/Spark-Firewall-SMB/Can-I-get-devices-that-expect-wps-to-connect-to-a-600-series/m-p/6887#M123 <HTML><HEAD></HEAD><BODY><P>I assume by WPS you mean WiFi-Protected Setup.</P><P>WPS is not supported by the 600/700/1100/1200R/1400 series because it's not secure.</P><P>The devices will need to be configured manually to connect to your WiFi network (or you need to configure it to be open).</P><P>I would allow the device to connect to the network first before you enable MAC filtering.</P><P>Then you can validate in Home &gt; Monitoring &gt; Active Computers to see what devices are actually connected.</P></BODY></HTML> Sat, 30 Sep 2017 04:11:01 GMT https://community.checkpoint.com/t5/Spark-Firewall-SMB/Can-I-get-devices-that-expect-wps-to-connect-to-a-600-series/m-p/6887#M123 PhoneBoy 2017-09-30T04:11:01Z