topic Re: r81.10 cli command to see all wireless active devices in Spark Firewall (SMB)

r81.10 cli command to see all wireless active devices

shay1 — Wed, 08 Jan 2025 19:55:52 GMT

hello mates

i am looking for cli command that will show me all the wireless active devices. instead of viewing them in webui

i found this command

sqlite3 -column /flash/devices.db 'select name,ipAddr,macAddr,deviceOS,typeName,brand,model,ifName from devicesDb;'

but it does not show the interface . only br0. i want to see the ips that were connect via wifi

tnx in advance

Re: r81.10 cli command to see all wireless active devices

Chris_Atkinson — Thu, 09 Jan 2025 03:17:14 GMT

Are you using R81.10.15 and have you reviewed with either ARP or DHCP info?

Gateway-Spark> show dhcp-leases
dhcp-leases-filter-ip-address - DHCP leases
dhcp-leases-filter-mac-address - DHCP leases
dhcp-leases-filter-network-interface - DHCP leases
dhcp-leases-filter-reserved-ip - DHCP leases
dhcp-leases - DHCP leases

arp -a

Re: r81.10 cli command to see all wireless active devices

PhoneBoy — Thu, 09 Jan 2025 03:31:48 GMT

If you are sharing your LAN and WiFi segments, they are connected internally via a bridge.
As such, they are shown as connected from that bridge (br0).
It's possible that sw info bridge might show this information, but it did not in my case.
sw info hosts might show it if your WiFi and LAN are not bridged.
Both are expert commands.

Re: r81.10 cli command to see all wireless active devices

shay1 — Thu, 09 Jan 2025 10:10:22 GMT

sorry but both posts did not work for me.

i pretty sure that there must be such command , as in webui you can see wireless clients