topic Re: Could not set administrator password: Field must have a value in Spark Firewall (SMB)

Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 13:14:38 GMT

HI There,

I logged a query on this board about 1 year ago where I hit a problem setting a preshared key from both the gui or CLI due to the /tmp filesystem being 100% full. See:

https://community.checkpoint.com/t5/SMB-Gateways-Spark/configure-password-vpn-site-by-site-by-command/td-p/87977

I have again hit the issue with more serious consequences in that I can no longer login to the primary appliance as I am unable reset the admin password at expiry:

admin@XXX:XXX:XXX:XXX's password:
Your password has expired and must be changed.
Enter password:
Enter password (again):
Could not set administrator password: Field must have a value
Enter password:

This seems to affect the primary HA device . the Secondary also had a full /tmp filesystem but I was still able to change the password without the 'Could not set administrator password: Field must have a value' error.

Right now I think my only option is to force a failover from the primary and hopefully I will be able to set the password once the unit assumes secondary status.

Has anyone else encountered similar issues due to /tmp becoming full?

Is there any way in increasing the /tmp space allocation?

Thanks for any information/ideas

Regards

Dek

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 13:24:16 GMT

What appliance is this?

Andy

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 13:30:24 GMT

Hi Andy

Its is a SMB Gateways (Spark) 1590 running R81.10 (996000575)

Regards

Dek

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 13:32:48 GMT

Hey Dek,

See if below post may help.

https://community.checkpoint.com/t5/SMB-Gateways-Spark/1800-SMB-tmp-usage-full/td-p/136805

Also, just curious, when you try set new password, did you enter any special characters?

Andy

Re: Could not set administrator password: Field must have a value

Vincent_Bacher — Thu, 02 May 2024 13:34:40 GMT

In case it's a centrally managed device i would first remotely check the files inside /tmp and delete what's possible using cprid

$CPDIR/bin/cprid_util -server <ip> -verbose rexec -rcmd /bin/bash -c "<expert command>"

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 13:54:06 GMT

Thanks Vincent. The 2 Units are locally managed not centrally. I was going to ask about trying a remote command to delete rotated log files '*.?' but was not sure how to enter a command from a non privileged shell etc. I will give that a go. I do have a user with a ssh key and can run non priv commands with ssh but I have a feeling that any command I run will first ask for the password to be reset

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 13:41:14 GMT

Hi Andy

The only special character user is an underscore. I will have a look at your link too. Thanks for that

Regards

Dek

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 13:45:36 GMT

I hope it helps.

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 13:53:16 GMT

Hi Andy,

Removing the underscore reports:

Could not set administrator password: Password must be at least 12 characters long and contain 4 or more different types of characters (e.g., uppercase, lowercase, numeric, non-alphanumeric)

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 13:55:00 GMT

Interesting...so if you type min 12 characters with 4 different types, still gives the same error?

Andy

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 13:57:54 GMT

Hi Andy, yes it gives the same error if the password meets the requirements. The same password used is accepted on the standby system

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 13:59:40 GMT

K, so that logically 100% tells us its not an issue with the password itself, but something else on that fw. I assume you tried rebooting it? If so, I would contact TAC to see if they have any suggestions...

Andy

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 14:04:15 GMT

I can run the command

ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i /var/lib/monitor/.ssh/id_rsa monitor@xx.xx.xx.xx "show interface Internet1"

Warning: Permanently added 'xx.xx.xx.xx' (RSA) to the list of known hosts.
dhcp-exclude-end-range:
vti-is-numbered:
dhcp-range-end:
bond-master:
lan-access-track:
prefix-delegation-subnet:
other-config-flag: off......

hotspot: off
wireless-transmission-rate: auto
wpa-encryption-type: Auto
relay relay-to:
prefix-delegation-internet-connection:table: 0xf57701b0
relay-tertiary:
reachable-timer: 0
retransmission-timer: 0
prefix-delegation-prefix-length:
remote:
send-mtu-flag: off
bridge-stp-priority: 32768
dns-ipv6 primary:
band: table: 0xf57388e0
802dot1x-re-authentication-frequency:
dtim-period: 1
bridge-range:
vlan-physical-port:
bridge-stp-forward-delay: 15
stp: off
include-ipv6-pool:
inheritSwitchSettings:
wds: off

So I just need to work out how I can delete some files in /tmp..

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 14:07:03 GMT

Awesome! Thats progress...see if commands from that link I sent will help.

Andy

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 14:12:25 GMT

HI Andy, I am unable to reboot just yet but the issue seems to be the lack of space in /tmp . I have opened a call with my supplier, hopefully they'll open a call with Checkpoint directly. I was able to fix the issue I had with the preshared key entry once I freed space in /tmp, however in this instance, I can't even login due to password expiry.

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 14:14:57 GMT

Yes, hopefully they can open a case for you, as it seems like pretty serious problem. Let us know how it goes.

Andy

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 14:16:41 GMT

I will most definitely let you know what Checkpoint come back with.

Thanks

Dek

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 16:56:54 GMT

I am trying to see what commands I can run from the 1st level shell , trying to run cpshell

ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i /var/lib/monitor/.ssh/id_rsa monitor@xx.xx.xx.xx cpshell
Warning: Permanently added 'xx.xx.xx.xx' (RSA) to the list of known hosts.
Could not chdir to home directory /home/monitor: No such file or directory
Unexpected error: You have no privileges to change this configuration

or seeing what happens specifying expert

ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i /var/lib/monitor/.ssh/id_rsa monitor@xx.xx.xx.xx "expert"
Warning: Permanently added 'xx.xx.xx.xx' (RSA) to the list of known hosts.
stty: standard input: Inappropriate ioctl for device
env: standard output: No space left on device

I have logged a call so will wait to hear if there is anything I can do barring a reboot/ failover

Re: Could not set administrator password: Field must have a value

DekPlent — Thu, 02 May 2024 17:21:19 GMT

From a ssh session on the standby I was able to use a command as Vincent showed?

[Expert@GK2]# $CPDIR/bin/cprid_util -server xx.xx.xx.xx -verbose rexec -rcmd /bin/bash -c "df"
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 20480 20480 0 100% /tmp
tmpfs 61440 15248 46192 25% /fwtmp
/dev/mmcblk1p8 4974080 39936 4661760 1% /logs
/dev/mmcblk1p11 8177080 969696 6772288 13% /storage
/dev/mmcblk1p6 709296 509376 148312 77% /pfrm2.0
tmpfs 20480 11144 9336 54% /tmp/log/local
tmpfs 512000 0 512000 0% /tetmp

ANd so I was able to list and then remove files:

[Expert@GK2]# $CPDIR/bin/cprid_util -server xx.xx.xx.xx -verbose rexec -rcmd /bin/bash -c "ls -l /tmp/log/*.?"
-rw-r--r-- 1 root root 1048624 Dec 12 03:51 /tmp/log/check_available_firmware.elg.0
-rw-r--r-- 1 root root 1085490 Oct 16 2023 /tmp/log/cphamcset.elg.0
-rw-r--r-- 1 root root 1085490 Oct 15 2023 /tmp/log/cphamcset.elg.1
-rw-r--r-- 1 root root 667648 Apr 4 11:47 /tmp/log/cxld.elg.0
-rw-r--r-- 1 root root 913064 Dec 21 08:57 /tmp/log/cxld.elg.1
-rw-r--r-- 1 root root 199975 Feb 1 22:30 /tmp/log/sfw_webd.elg.1
-rw-r--r-- 1 root root 200001 Dec 28 18:04 /tmp/log/sfw_webd.elg.2
-rw-r--r-- 1 root root 199991 Nov 29 15:59 /tmp/log/sfw_webd.elg.3
-rw-r--r-- 1 root root 199992 Nov 7 03:12 /tmp/log/sfw_webd.elg.4
-rw-r--r-- 1 root root 1040384 Apr 20 09:47 /tmp/log/sfwd.elg.0
-rw-r--r-- 1 root root 740718 Apr 6 19:13 /tmp/log/sfwd.elg.1
-rw-r--r-- 1 root root 782053 Apr 8 14:03 /tmp/log/ted.elg.0
-rw-r--r-- 1 root root 937984 Dec 5 00:02 /tmp/log/ted.elg.1
-rw-r--r-- 1 root root 1048592 Apr 20 12:47 /tmp/log/uc_activation.elg.0
-rw-r--r-- 1 root root 1048618 Apr 12 22:55 /tmp/log/uc_activation.elg.1

[Expert@GK2]# $CPDIR/bin/cprid_util -server xx.xx.xx.xx -verbose rexec -rcmd /bin/bash -c "rm /tmp/log/*.?"

[Expert@GK2]# $CPDIR/bin/cprid_util -server xx.xx.xx.xx -verbose rexec -rcmd /bin/bash -c "df -h"
Filesystem Size Used Available Use% Mounted on
tmpfs 20.0M 9.3M 10.7M 47% /tmp
tmpfs 60.0M 14.9M 45.1M 25% /fwtmp
/dev/mmcblk1p8 4.7G 39.0M 4.4G 1% /logs
/dev/mmcblk1p11 7.8G 947.0M 6.5G 13% /storage
/dev/mmcblk1p6 692.7M 497.4M 144.8M 77% /pfrm2.0
tmpfs 20.0M 10.9M 9.1M 54% /tmp/log/local
tmpfs 500.0M 0 500.0M 0% /tetmp

And then finally able to reset the password

[Expert@GK2]# ssh admin@xx.xx.xx.xx
admin@xx.xx.xx.xx's password:
Your password has expired and must be changed.
Enter password:
Enter password (again):
GK1>

Thanks Very much for your help Vincent.

Thanks Andy too, I will set the threshold tmp filesystem higher and have some monitoring/cron scripts to clear some of those files down.

I will continue with Checkpoint to ask them about this issue and update here, once I hear back

Re: Could not set administrator password: Field must have a value

the_rock — Thu, 02 May 2024 17:29:02 GMT

Thats better news...

Andy