topic Re: SmartMove Errors Assistance in SmartMove

SmartMove Errors Assistance

prashanth — Sat, 11 May 2024 09:10:30 GMT

Hi There,

We are migrating from Cisco ASA to CheckPoint with the help of SmartMove tool. I have noticed below error messages under the errors.html. Can you please assist to resolve these errors.

28	Unrecognized topology details: 206.190.106.57 255.255.255.255.: cannot create network objects;
29	Unrecognized topology details.: interface details: Interface_inside.;
30	Unrecognized topology details: 169.141.1.74 255.255.255.255.: cannot create network objects;
31	Unrecognized topology details: 169.141.36.33 255.255.255.255.: cannot create network objects;
32	Unrecognized topology details: 169.141.36.36 255.255.255.255.: cannot create network objects;
33	Unrecognized topology details.: interface details: Interface_RMDS.;
34	Unrecognized topology details: 10.65.7.8 255.255.255.255.: cannot create network objects;
35	Unrecognized topology details: 203.208.227.69 255.255.255.255.: cannot create network objects;
36	Unrecognized topology details.: interface details: Interface_KEWEB.;
37	Unrecognized topology details: 10.1.24.1 255.255.255.255.: cannot create network objects;
38	Unrecognized topology details.: interface details: Interface_KETRADE.;
39	Unrecognized topology details: 10.97.3.4 255.255.255.255.: cannot create network objects;
40	Unrecognized topology details.: interface details: Interface_KETRADE-NEW.;

Thanks in Advance

Re: SmartMove Errors Assistance

the_rock — Sat, 11 May 2024 12:49:13 GMT

Its been some time since I used that tool for Cisco to CP conversion, but it did work fine, though I supposed few things have changed since then. Did you follow the actual smart move sk for all the steps?

If yes, you would need to check where those IP addresses are referenced and go from there.

Andy

Re: SmartMove Errors Assistance

Tal_Paz-Fridman — Sat, 11 May 2024 12:59:06 GMT

Adding @JonathanKukin

Re: SmartMove Errors Assistance

the_rock — Sat, 11 May 2024 12:59:44 GMT

This is the sk I was referring to.

Andy

https://support.checkpoint.com/results/sk/sk115416

Re: SmartMove Errors Assistance

prashanth — Mon, 13 May 2024 02:35:52 GMT

Yes, I'm following this KB but still encountered the errors.

Re: SmartMove Errors Assistance

PhoneBoy — Mon, 13 May 2024 15:52:03 GMT

Note that this tool largely automates the process, but in some cases manual steps may be required for a successful migration.
This might be a situation where you have to manually create the relevant object(s).
However, without knowing what the errors are in relation to (specifically the relevant configuration from the Cisco side), it's difficult to tell you how to resolve this.

You may want to work with your Check Point SE on this.

Re: SmartMove Errors Assistance

the_rock — Tue, 14 May 2024 02:08:45 GMT

Are you able to tell, ballpark estimate, how many network objects are missing?

Andy