topic Re: Remote Access and routing configured on endpoint client in SASE and Remote Access

Remote Access and routing configured on endpoint client

marcinw — Wed, 07 Jul 2021 11:47:03 GMT

If "route all traffic to gateway" in global properties will be chosen with option "configured on endpoint client", what will be applied/marked by default on RA user site in endpoint setting VPN Tunneling and " Encrypt all traffic and route to gateway" ? will be ticked or not ?

Re: Remote Access and routing configured on endpoint client

PhoneBoy — Wed, 07 Jul 2021 23:36:22 GMT

I believe it will be disabled by default unless you’ve configured it differently in the installation package provided to your users.

Re: Remote Access and routing configured on endpoint client

marcinw — Thu, 08 Jul 2021 10:41:09 GMT

By Disabled do you mean "Encrypt all traffic and route to gateway" - NO (empty field) ?

Re: Remote Access and routing configured on endpoint client

the_rock — Thu, 08 Jul 2021 14:36:11 GMT

I just tried this in the lab and when I selected in global properties to "configured on endpoint client" and pushed policy, option on gateway under vpn clients -> remote access -> allow vpn clients to route gateway through this gateway did not change, it was unchecked. Logically, to me anyway, though I could be wrong, appears that both options would need to be selected for this to work. So, say even if you checked yes for hub mode in global properties, you still may have to enable the other option I mentioned for this to work 100%.

Re: Remote Access and routing configured on endpoint client

PhoneBoy — Thu, 08 Jul 2021 23:20:49 GMT

That's precisely what I mean.