topic Re: How to change remote access VPN port in SASE and Remote Access

How to change remote access VPN port

Baasanjargal_Ts — Mon, 26 Jul 2021 01:32:02 GMT

How Can change remote access VPN port from default 443 to set any other service.? As I read some document, need to changes this visitor mode service. But it doesn't changeable. It is grey, not active.

Re: How to change remote access VPN port

Baasanjargal_Ts — Mon, 26 Jul 2021 02:30:27 GMT

Found the solution. If we enable Mobile access blade. It is not changeable. I've disabled Mobile access blade, then I can change that ports. We just using Remote access VPN, so this works.

Re: How to change remote access VPN port

PhoneBoy — Mon, 26 Jul 2021 02:51:39 GMT

Mobile Access Blade requires that Visitor Mode also uses HTTPS.
See: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk107852&partition=Advanced&product=SSL
Unless you need the MAB portal, remote access can be provided with the VPN blade.

Re: How to change remote access VPN port

mohammed1987 — Sat, 04 Apr 2026 21:00:09 GMT

Hi,

if so, can you please highlight the difference and the uses cases between Mobile access Blade and VPN IPSec blade ?

Thanks in advance.

Re: How to change remote access VPN port

PhoneBoy — Mon, 06 Apr 2026 15:50:58 GMT

For basic remote access function (i.e. with a thick client or SNX), they are exactly the same.
Mobile Access Blade offers additional functionality described in the documentation: https://sc1.checkpoint.com/documents/R82.10/WebAdminGuides/EN/CP_R82.10_MobileAccess_AdminGuide/Default.htm