topic Re: R81.10 Office mode assigned IP issue in SASE and Remote Access

R81.10 Office mode assigned IP issue

Hasnain_Ansari — Sat, 06 Aug 2022 08:07:57 GMT

Hi,

We have migrated from R80.40 to R81.10 and facing an issue that office mode assigned IP is not getting released/handled properly.
We have around 600 client connected via VPN and previously at R80.40 we had office mode assigned ip was maximum 700-800 but at R81.10 we have office mode assigned ip around 2300+. We managed the situation by doing some changes at firewall but still facing the issue as still office mode assigned ip around 2300+.
We tried to fine tune the timer from default (480 minutes) to 60 minutes from default but problem still persist.
Note : It's a maestro setup.

Any solution ?

Regards;
Hasnain Ansari

Re: R81.10 Office mode assigned IP issue

_Val_ — Sat, 06 Aug 2022 09:45:37 GMT

Please open a support request with TAC for this

Re: R81.10 Office mode assigned IP issue

Chris_Atkinson — Sat, 06 Aug 2022 11:25:53 GMT

Please be sure to indicate which JHF take, how the IP assignment is being done (DHCP?) and what traffic distribution mode is used in your maestro environment currently?