https://community.checkpoint.com/t5/SASE-and-Remote-Access/Multiple-gateways-one-SMS-1-firewall-missing-from-Gateway-drop/m-p/156136#M6358 <P>Could you please provide some screenshots?</P> Thu, 01 Sep 2022 06:44:54 GMT _Val_ 2022-09-01T06:44:54Z https://community.checkpoint.com/t5/SASE-and-Remote-Access/Multiple-gateways-one-SMS-1-firewall-missing-from-Gateway-drop/m-p/155908#M6357 <P>Hi there,</P><P>&nbsp;</P><P>I have just inherited a SMS with multiple firewalls.</P><P>For some reason - if you create a site to 1 particular gateway and then connect successfully - the client will not have that gateway in the list of available gateways for subsequent vpn connections.</P><P>I have checked that the gateway is in the Remote Access VPN community.</P><P>Also it does connect once successfully.</P><P>Check Point Capsule VPN - connects all the time - probably since it does not rely on downloaded topology information.</P><P>I just cannot find why this is occuring.</P><P>&nbsp;</P><P>&lt;tried to disable mep - this removed the gateways list on the Windows VPN client but still could only connect once - then would not connect again .. also tried to put the actual ip address in the trac file.. same story connect once then not again. - I do see the correct extertnal IP in the properties so its not the setting to change the IP in GUIDbedit &gt;</P><P>&nbsp;</P><P>Any ideas ...</P><P>&nbsp;</P><P>Thanks</P> Mon, 29 Aug 2022 15:38:13 GMT https://community.checkpoint.com/t5/SASE-and-Remote-Access/Multiple-gateways-one-SMS-1-firewall-missing-from-Gateway-drop/m-p/155908#M6357 Darren_Fine 2022-08-29T15:38:13Z https://community.checkpoint.com/t5/SASE-and-Remote-Access/Multiple-gateways-one-SMS-1-firewall-missing-from-Gateway-drop/m-p/156136#M6358 <P>Could you please provide some screenshots?</P> Thu, 01 Sep 2022 06:44:54 GMT https://community.checkpoint.com/t5/SASE-and-Remote-Access/Multiple-gateways-one-SMS-1-firewall-missing-from-Gateway-drop/m-p/156136#M6358 _Val_ 2022-09-01T06:44:54Z