https://community.checkpoint.com/t5/SASE-and-Remote-Access/Is-it-possible-to-use-VPN-from-host-to-VM/m-p/181820#M576 <P>For native VPN clients on Linux, you're looking at SNX (a Check Point client) or StrongSWAN.<BR />You will need to work with your administrators to enable you to use either of these options.</P> <P>Even if you can route the traffic to the VM running the Endpoint client, you have the following things to contend with:</P> <UL> <LI>Routing the traffic to the VM (depends on your virtualization environment)</LI> <LI>The traffic being received by the VM (may be blocked by the virtualization environment, Endpoint firewall, the configuration of which is controlled by your administrator)</LI> <LI>The traffic being routed/NATTed through the VPN tunnel (IP Routing is generally disabled in the OS AND the Remote Access client does not perform NAT)</LI> </UL> <P>Bottom line: this is not supported.</P> Tue, 23 May 2023 19:14:46 GMT PhoneBoy 2023-05-23T19:14:46Z https://community.checkpoint.com/t5/SASE-and-Remote-Access/Is-it-possible-to-use-VPN-from-host-to-VM/m-p/181727#M575 <P>Hello,&nbsp;</P><P><SPAN>I use Checkpoint Endpoint VPN client for Windows. It work on local machine. then I want to work on Linux OS.</SPAN></P><P>I create a VM with Hyper-V (Ubuntu 22.4) and my host is windows 10 pro.</P><P>How should I configure the VM to use the VPN from the host machine?</P> Tue, 23 May 2023 10:01:51 GMT https://community.checkpoint.com/t5/SASE-and-Remote-Access/Is-it-possible-to-use-VPN-from-host-to-VM/m-p/181727#M575 hiptanos 2023-05-23T10:01:51Z https://community.checkpoint.com/t5/SASE-and-Remote-Access/Is-it-possible-to-use-VPN-from-host-to-VM/m-p/181820#M576 <P>For native VPN clients on Linux, you're looking at SNX (a Check Point client) or StrongSWAN.<BR />You will need to work with your administrators to enable you to use either of these options.</P> <P>Even if you can route the traffic to the VM running the Endpoint client, you have the following things to contend with:</P> <UL> <LI>Routing the traffic to the VM (depends on your virtualization environment)</LI> <LI>The traffic being received by the VM (may be blocked by the virtualization environment, Endpoint firewall, the configuration of which is controlled by your administrator)</LI> <LI>The traffic being routed/NATTed through the VPN tunnel (IP Routing is generally disabled in the OS AND the Remote Access client does not perform NAT)</LI> </UL> <P>Bottom line: this is not supported.</P> Tue, 23 May 2023 19:14:46 GMT https://community.checkpoint.com/t5/SASE-and-Remote-Access/Is-it-possible-to-use-VPN-from-host-to-VM/m-p/181820#M576 PhoneBoy 2023-05-23T19:14:46Z