topic Re: 2 Office mode DHCP pools in SASE and Remote Access

2 Office mode DHCP pools

Shahar_Grober — Fri, 10 May 2019 13:26:06 GMT

Hi,

is there a way to assign different users groups connecting to the same gateway with 2 different DHCP Office mode pools?

Group 1 --> DHCP office mode pool 1

Group 2 --> DHCP office mode Pool 2

Re: 2 Office mode DHCP pools

Jerry — Fri, 10 May 2019 13:39:20 GMT

yes and no, all depends how advanced you are with the Gaia 🙂

Re: 2 Office mode DHCP pools

Shahar_Grober — Fri, 10 May 2019 13:42:04 GMT

any documentation/SK about it?

Re: 2 Office mode DHCP pools

EdsonF96 — Fri, 10 May 2019 14:03:11 GMT

Yes, you have to configure the $FWDIR/conf/ipassignment.conf on the gateway . Follow sk33422 😄

Re: 2 Office mode DHCP pools

Erik_perez — Fri, 10 May 2019 14:40:14 GMT

Hi,

I found this sk I think it will help you for what you want to do, because graphically you only accept a single network object to configure the office mode.

https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/CP_R80.10_RemoteAccessVPN_AdminGuide/html_frameset.htm?topic=documents/R80.10/WebAdminGuides/EN/CP_R80.10_RemoteAccessVPN_AdminGuide/13857

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk33422

greetings

Re: 2 Office mode DHCP pools

Hrvoje_Brlek — Tue, 08 Dec 2020 08:34:58 GMT

Can we use the ipassignment.conf together with a specific DHCP server?

For example, I have set a specific LDAP group in ipassignment.conf to receive an IP address in range of 10.10.1.1-10.10.1.253, but also have a user (that is a member of the specific LDAP group) that is statically assigned on the Micrososft DHCP server to receive an IP address 10.10.1.222 (inside the above mentioned IP pool), will he receive this IP address?