topic Re: Remote Access, Site is not responding. You might be in hotspot environment in SASE and Remote Access

Remote Access, Site is not responding. You might be in hotspot environment

MardoqueoRob — Fri, 26 Jul 2019 14:45:39 GMT

Good morning everyone

I don't speak English but translated what I want to ask.

I have a fireway R80.30 with two public interfaces eth1 and eth2, eth2 is used for VPN to other sites and is the one selected in link selection

I already configured the VPN remote access with users and password checkpoint and when I add the public ip to make the connection it does not work with eth2, only with eth1 but the first connection works if I disconnect and reconnect it no longer connects and I see that grab the public ip of eth2.
Any additional settings I would have to do?

Re: Remote Access, Site is not responding. You might be in hotspot environment

PhoneBoy — Sat, 27 Jul 2019 00:17:52 GMT

If you want a different Link Selection setting for Remote Access, refer to: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk32229
By default, we use the same settings for both Site-to-Site and Client-to-Site VPN.

Re: Remote Access, Site is not responding. You might be in hotspot environment

MardoqueoRob — Mon, 29 Jul 2019 16:17:09 GMT

Thank you very much PhoneBoy with this solution I could achieve it. you are big

Re: Remote Access, Site is not responding. You might be in hotspot environment

chen9766 — Thu, 23 Apr 2020 06:33:40 GMT

Good morning,

In my case, I have just changed my ISP at home, and when I'm trying to make a new connection I get this message that the site i snot responding.

any suggestions?

Re: Remote Access, Site is not responding. You might be in hotspot environment

Hemps — Wed, 07 Dec 2022 19:20:18 GMT

I know this is from 2020, But a user changed ISP and now they get the hotspot error. How did you resolve this?