Why SecuRemote gets always the same IP address..?

aasa_ar — Wed, 29 Apr 2020 16:02:24 GMT

We are using a remote solution based on 3000 apliance, Gaia R80.30 and Checkpoint VPN client in SecuRemote mode for remote users.

To distribute IP scope to remote users, we have configured a IP Pool 172.16.153.0/24 that works well.

But on the client side (all) they gets the same IP address 10.192.100.2 for "Check Point Virtual Network Adapter For Endpoint VPN Client" (sees at ipconfig /all)

That IP segment correspond to our licenses of "Office mode" that we are NOT using (do not offer Office mode)

Any idea..? we should get a different IP address for eache client to make an VoIP voice application to work.

Thanks for your suggestions.

Re: Why SecuRemote gets always the same IP address..?

PhoneBoy — Thu, 30 Apr 2020 01:36:21 GMT

If you want apps like VoIP to work, then you need Office Mode.
SecuRemote does not use Office Mode at all and what you're seeing is expected behavior.
You need to use Check Point Mobile or Endpoint Security VPN, both of which require appropriate licenses (Mobile Access and SBA/CPEP-ACCESS respectively).

topic Re: Why SecuRemote gets always the same IP address..? in SASE and Remote Access

Why SecuRemote gets always the same IP address..?

Re: Why SecuRemote gets always the same IP address..?