topic changing default port of Endpoint Security VPN in SASE and Remote Access https://community.checkpoint.com/t5/SASE-and-Remote-Access/changing-default-port-of-Endpoint-Security-VPN/m-p/86858#M10298 <P>i had already used https port 443 for nat purpose . While connecting from remote side i cannot reach the site due to previous natting . So can we change the port or any other method .</P> Sun, 31 May 2020 11:14:15 GMT PawanShahi3388 2020-05-31T11:14:15Z changing default port of Endpoint Security VPN https://community.checkpoint.com/t5/SASE-and-Remote-Access/changing-default-port-of-Endpoint-Security-VPN/m-p/86858#M10298 <P>i had already used https port 443 for nat purpose . While connecting from remote side i cannot reach the site due to previous natting . So can we change the port or any other method .</P> Sun, 31 May 2020 11:14:15 GMT https://community.checkpoint.com/t5/SASE-and-Remote-Access/changing-default-port-of-Endpoint-Security-VPN/m-p/86858#M10298 PawanShahi3388 2020-05-31T11:14:15Z Re: changing default port of Endpoint Security VPN https://community.checkpoint.com/t5/SASE-and-Remote-Access/changing-default-port-of-Endpoint-Security-VPN/m-p/86899#M10299 If you are using Mobile Access Blade, no.<BR />If you are not using Mobile Access Blade, you can configure the Visitor Mode port by following the instructions under Required Gateway Settings section in here: <A href="http://downloads.checkpoint.com/dc/download.htm?ID=60345" target="_blank">http://downloads.checkpoint.com/dc/download.htm?ID=60345</A><BR /> Mon, 01 Jun 2020 05:50:16 GMT https://community.checkpoint.com/t5/SASE-and-Remote-Access/changing-default-port-of-Endpoint-Security-VPN/m-p/86899#M10299 PhoneBoy 2020-06-01T05:50:16Z