hub mode configuration for RA VPN

Ana_11 — Wed, 01 Jul 2020 16:44:05 GMT

Hi I have configured hub mode configuration for one of the cluster gateways to route all the traffic Route from Remote Access clients, including internet traffic, through Security Gateway.

We manage 3 security gateways located in different location from a centralized management server.

In the "Route all traffic to gateway" field (in "Global Properties"), I have selected "Yes". Everything worked fine

But later we have found that location A on which i have not configured this feature. Their default route for remote access VPN users was also got changed and we got the outage. So i have disabled the Route all traffic to gateway" field (in "Global Properties"), from yes to NO.

But the other location B had no impact from this change in global properties.

Location C is working as expected.

So what would be possible reason that changes in global properties has impacted one location and not other location wherein all the gateways are managed by the same security management.

Re: hub mode configuration for RA VPN

PhoneBoy — Sun, 05 Jul 2020 20:04:30 GMT

When you made this change did you push policy to ALL gateways?
Also clients will only notice the change (or should) next time they connect to the site.
Also what version/JHF level?

Re: hub mode configuration for RA VPN

Maarten_Sjouw — Sun, 05 Jul 2020 20:36:12 GMT

Next to that check on the HUB mode check box in the gateway RA settings.

topic hub mode configuration for RA VPN in SASE and Remote Access

hub mode configuration for RA VPN

Re: hub mode configuration for RA VPN

Re: hub mode configuration for RA VPN