topic Re: Checkpoint SecuRemote VPN Client in SASE and Remote Access

Checkpoint SecuRemote VPN Client

KevinA — Wed, 15 Jul 2020 09:04:22 GMT

Hi Guys,

I'm trying to use SecuRemote as a VPN client but am having some issues;

1. the client connects to the gateway but disconnects soon after, and tries to reconnect (keeps looping)

2. The IP address assigned to the client (windows) shows a an ip which is not assigned to the office mode pool. Office mode pool is the default of 172.16.10.0 but the client gets assigned 10.16.161.170..

So far i've only activated the IPSec VPN blade and i'm running R80.30 take 196.

So how do i change the IP address assigned to the client, is there anything else i'm missing?

Cheers,

Kevin

Re: Checkpoint SecuRemote VPN Client

_Val_ — Wed, 15 Jul 2020 10:11:21 GMT

Make sure you have these two options on:

If they are, verify you did not install it as a SecureRemote, and you have license for OM

Re: Checkpoint SecuRemote VPN Client

Prabulingam_N1 — Thu, 16 Jul 2020 15:42:26 GMT

Hi Kevin,

You cannot control Office Mode IP if ur using SecuRemote Client as its Free client provided.

Only Licensed, will get Officemode assigned IP address by you.

Regards, Prabu

Re: Checkpoint SecuRemote VPN Client

PhoneBoy — Thu, 16 Jul 2020 16:16:00 GMT

SecuRemote does not support Office Mode. If that's what you want to use because it's free, see: https://community.checkpoint.com/t5/Remote-Access-VPN/Quick-Primer-on-How-to-Configure-your-Gateway-for-SecuRemote/m-p/79081#M2717

Otherwise you will need to install the client as either Check Point Mobile or Endpoint Security VPN and have the relevant Mobile Access/Endpoint licenses.

Re: Checkpoint SecuRemote VPN Client

KevinA — Tue, 21 Jul 2020 06:33:39 GMT

Thanks @PhoneBoy exactly what i was looking for