topic CPU utilization Alert configuration in Playblocks

CPU utilization Alert configuration

Saps — Mon, 02 Nov 2026 05:14:19 GMT

We have our management server in Smart 1 Cloud and Cluster Gateways.

I want to get alert for the CPU utilization for my Gateways. How can i configure it. I no need SNMP is there any other option.

Re: CPU utilization Alert configuration

Tal_Paz-Fridman — Mon, 02 Nov 2026 05:24:51 GMT

I would use AIOps available in Check Point Portal:

https://sc1.checkpoint.com/documents/Infinity_Portal/WebAdminGuides/EN/Events-Admin-Guide/Events_AIOps/Admin-Guide/Topics/infinity-aiops/aiops-introduction.html

I believe Playblocks will introduce capabilities that will also cover this scenario. @Tal_Ben_Bassat might have additional information.

Re: CPU utilization Alert configuration

Saps — Mon, 02 Nov 2026 05:26:57 GMT

I have already configured but how can i configure the Alerts for CPU utilization

Re: CPU utilization Alert configuration

Timothy_Hall — Mon, 02 Nov 2026 13:27:39 GMT

The SmartView Monitor can do this, but I'm not sure if it will work on Smart-1 Cloud. Once configured as shown below you'll need to start the alert daemon by selecting Tools...Start Alert Daemon, and then configure the properties of the alerts themselves back in the SmartConsole under Global Properties...Log& Alert...Alerts.