Maestro SIC reset command

todd — Tue, 03 May 2022 02:19:07 GMT

Hi Expert,

What is the difference between cpconfig sic reset and asg_blade_config reset_sic -reboot_all <Activation-key> ?

Thank you!

[Global] FW-ch01-01 > cpconfig
This program will let you re-configure
your Check Point products configuration.

Configuration Options:
----------------------
(1) Licenses and contracts
(2) SNMP Extension
(3) PKCS#11 Token
(4) Random Pool
(5) Secure Internal Communication
(6) Disable cluster membership for this gateway
(7) Enable Check Point Per Virtual System State
(8) Enable Check Point ClusterXL for Bridge Active/Standby
(9) Check Point CoreXL
(10) Automatic start of Check Point Products

(11) Exit

asg_blade_config reset_sic -reboot_all <Activation-key>

Enter your choice (1-11) :

Re: Maestro SIC reset command

the_rock — Tue, 03 May 2022 12:20:23 GMT

I know that when you do it via cpconfig, it 100% loads initial policy during the process. Not certain if it does the same thing with 2nd command though.

topic Maestro SIC reset command in Hyperscale Firewall (Maestro)

Maestro SIC reset command

Re: Maestro SIC reset command