https://community.checkpoint.com/t5/Hyperscale-Firewall-Maestro/Distribution-mode-on-VRF-interface/m-p/281181#M4366 <P>Hi,</P><P>We have an interface connected to a VRF on our core router, which aggregates multiple remote access-layer networks (such as remote branches, back offices, etc.).</P><P>Since this setup involves a many-to-few relationship, I am wondering if it would be beneficial to change the traffic distribution on this particular interface from user mode to network mode.</P><P>I'd like to get your thoughts on this because I haven't found any clear documentation on when to use each distribution mode (apart from based on topology setting - auto), or what correction values are acceptable (ideally it should be 0, of course ;-))</P> Mon, 17 Aug 2026 22:20:35 GMT JaAnd 2026-08-17T22:20:35Z https://community.checkpoint.com/t5/Hyperscale-Firewall-Maestro/Distribution-mode-on-VRF-interface/m-p/281181#M4366 <P>Hi,</P><P>We have an interface connected to a VRF on our core router, which aggregates multiple remote access-layer networks (such as remote branches, back offices, etc.).</P><P>Since this setup involves a many-to-few relationship, I am wondering if it would be beneficial to change the traffic distribution on this particular interface from user mode to network mode.</P><P>I'd like to get your thoughts on this because I haven't found any clear documentation on when to use each distribution mode (apart from based on topology setting - auto), or what correction values are acceptable (ideally it should be 0, of course ;-))</P> Mon, 17 Aug 2026 22:20:35 GMT https://community.checkpoint.com/t5/Hyperscale-Firewall-Maestro/Distribution-mode-on-VRF-interface/m-p/281181#M4366 JaAnd 2026-08-17T22:20:35Z