SCV issues on Maestro R82

Naguinix — Thu, 23 Apr 2026 17:26:10 GMT

Hi community,

Has anyone experienced issues with Secure Configuration Verification (SCV) in Maestro with R82?

Topology:

Management R82 (JHF 60) > 2 x MHO 140 (JHF 60) > 2X GW 9400 (JHF 60) > Security Group > VSX > GW_Remote_access (Blades:FW,MOB,VPN,)

After migrating from VSX with R81.20, where everything was working fine, we have encountered several issues,

The logs show various compliance errors; it appears that the management server isn't properly sending the local.scv file to the members under the Maestro (2X 9400 ).

We tried removing the secondary Maestro GW member, manually transferring the file from the management server to the GW, and then cloning it—and it worked for a few days, but now it's failing again.

We’re sure the configuration is correct since we have MEP, with some firewalls on R81.20 running VSX as well, and clients connect fine there.

We also tried to recreate the site from the endpoint clients, but without success.
IP assignment, authentication, and even MFA all work well.

These are some logs we have:

- Unknown user
- Client configuration is not verified
- No security policy is configured
- And other errors.

We already have an open case, but I'd like to know if anyone else has had issues with Maestro + VSX + SCV in R82

TY.

Re: SCV issues on Maestro R82

Lesley — Thu, 23 Apr 2026 20:46:37 GMT

Local SCV settings can be customized by Security Gateway when creating a $FWDIR/conf/local.scv_<GW NAME> file, otherwise the settings fall back to the standard local.scv configuration.

Have you done this?

Re: SCV issues on Maestro R82

the_rock — Thu, 23 Apr 2026 20:51:49 GMT

I see what Lesley is saying, definitely something to verify.

topic Re: SCV issues on Maestro R82 in Hyperscale Firewall (Maestro)

SCV issues on Maestro R82

Re: SCV issues on Maestro R82

Re: SCV issues on Maestro R82