Dual Bond in same network - Single Site Maestro - 1 Group

TimV — Mon, 01 Feb 2021 18:34:44 GMT

Hi all,

I'm facing an config I'm not quite sure of how to implement it.

Case:
I have 2 SGM, in 2 datacenters/rooms, 2 maestro 140's and all in 1 security group.
We need to get 2 routers connected to it as shown in the picture. Its converning Bond1 and Bond2. Both should be in the same network and should have only 1 IP address and VIP.

Is this possible to configure on my setup, and if so, what kind of interfaces should be creating?

Thx

Tim

Re: Dual Bond in same network - Single Site Maestro - 1 Group

Anatoly — Thu, 04 Feb 2021 04:37:16 GMT

Hi,

Maestro is a single gateway, so there's no need to configure VIP interfaces as you do in cluster.

Just imagine you had regular single gateway. Topology would be the same.

Thanks

Anatoly

topic Dual Bond in same network - Single Site Maestro - 1 Group in Hyperscale Firewall (Maestro)

Dual Bond in same network - Single Site Maestro - 1 Group

Re: Dual Bond in same network - Single Site Maestro - 1 Group