topic Re: How to Delete Interface not using on MHO in Hyperscale Firewall (Maestro)

How to Delete Interface not using on MHO

MarcuzShinz — Tue, 24 Sep 2024 02:49:17 GMT

Dear Team,

I am currently having a problem with my MHO device, we have 2 MHO devices working Single Site. Previously on the MHO-02 device I plugged the Downlink cable between MHO-02 and SG via port 2/47/1, however I later stopped using this port and switched to port 2/29/1.

Now, when i show command orch_stat on the MHO-02, it still show port 2/27/1 Inactive. I also removed this port from the security group, but somehow it still shows up, it looks like a cache data.

How to remove this interface out MHO-02?

Re: How to Delete Interface not using on MHO

emmap — Tue, 24 Sep 2024 03:38:56 GMT

The blunt method would be to remove and re-add the SGM from/to the security group, but it might be something that can be resolved with restarting the MHO. If restarting the MHO doesn't do it then TAC may be able to assist with editing a database file to remove the interface from the config.

Re: How to Delete Interface not using on MHO

MarcuzShinz — Tue, 24 Sep 2024 04:04:47 GMT

Thanks for your response, I think, I'll check file /etc/maestro.json and try edit in that file.

Re: How to Delete Interface not using on MHO

Pre_yo — Sat, 03 May 2025 06:30:33 GMT

Is there any solution for this issue?, i have simililar issue in our environment

Re: How to Delete Interface not using on MHO

Dario_Perez — Tue, 06 May 2025 00:09:34 GMT

https://support.checkpoint.com/results/sk/sk180831