https://community.checkpoint.com/t5/Hyperscale-Firewall-Maestro/PBR-in-in-maestro/m-p/241737#M3192 <P>I have a maestro firewall (security group &amp; MHO) has management IPs in 10.1.1.0/24 network. This VLAN is exist in LAN network switches behind the firewall. The problem here is whenever users trying to connect to the server in 10.1.1.0/24 from spoke location the route end on firewall with management interface as connected route.&nbsp;</P><P>I know changing an ip address on firewall may fix the issue but i am looking some other way. Does PBR takes over to the connected routes?</P><P>or may be any other option i can follow?</P> Thu, 20 Feb 2025 04:51:29 GMT riyalsandeep1 2025-02-20T04:51:29Z https://community.checkpoint.com/t5/Hyperscale-Firewall-Maestro/PBR-in-in-maestro/m-p/241737#M3192 <P>I have a maestro firewall (security group &amp; MHO) has management IPs in 10.1.1.0/24 network. This VLAN is exist in LAN network switches behind the firewall. The problem here is whenever users trying to connect to the server in 10.1.1.0/24 from spoke location the route end on firewall with management interface as connected route.&nbsp;</P><P>I know changing an ip address on firewall may fix the issue but i am looking some other way. Does PBR takes over to the connected routes?</P><P>or may be any other option i can follow?</P> Thu, 20 Feb 2025 04:51:29 GMT https://community.checkpoint.com/t5/Hyperscale-Firewall-Maestro/PBR-in-in-maestro/m-p/241737#M3192 riyalsandeep1 2025-02-20T04:51:29Z