topic Re: How to check optical power on Maestro Orchestrators and SGMs in Hyperscale Firewall (Maestro)

How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Thu, 28 Mar 2024 11:20:47 GMT

Hi,

Could someone help me with the command to check the optical powers on the MHO ports and SGMs please?

[Expert@MHO:0]# ethtool -m dl121
Cannot get module EEPROM information: Operation not supported
[Expert@MHO:0]#
[Expert@MHO:0]# ethtool -m 1/31/1
Cannot get module EEPROM information: No such device
[Expert@MHO:0]#

[Expert@MHO:0]# mii-diag -g dl65
SIOCGMIIPHY on dl65 failed: Operation not supported
[Expert@MHO:0]#

[Expert@MHO:0]# ifconfig dl121
dl121 Link encap:Ethernet HWaddr 00:02:03:04:05:C0
UP BROADCAST RUNNING MULTICAST MTU:9216 Metric:1
RX packets:5770 errors:0 dropped:0 overruns:0 frame:0
TX packets:5770 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:911292 (889.9 KiB) TX bytes:980537 (957.5 KiB)

[Expert@MHO:0]#

Thanks!

Re: How to check optical power on Maestro Orchestrators and SGMs

Chris_Atkinson — Thu, 28 Mar 2024 12:35:56 GMT

Is this R81.20 and have you tried:

show interface <Name of Interface> xcvr

show interface <Name of Interface> xcvr_detail

Re: How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Thu, 28 Mar 2024 13:01:05 GMT

Hi Chris,

I tried as well.

MHO> show interface

Mgmt1 Sync-ext Sync-int dl65 dl69 dl73 dl77 dl81 dl85 dl89 dl93 dl97 dl101 dl105 dl109
dl113 dl117 dl121 dl125 eth1-CIN1 lo swid0_eth
MHO> show interface dl117
state on
mac-addr 00:02:03:04:05:cc
type ethernet
link-state link up
mtu 9216
auto-negotiation off
speed N/A
ipv6-autoconfig Not configured
monitor-mode Not configured
duplex N/A
link-speed Not configured
comments
ipv4-address Not Configured
ipv6-address Not Configured
ipv6-local-link-address Not Configured

Statistics:
TX bytes:1009947 packets:5943 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:2968551 packets:5949 errors:0 dropped:0 overruns:0 frame:0

SD-WAN: Not Configured
MHO>
MHO> show interface dl117 xcv
xcvr - Show information about the transceiver in the specified interface
xcvr_detail - Show detailed information about the transceiver in the specified interface
MHO> show interface dl117 xcvr
Cannot get module EEPROM information: Operation not supported
Port Check Point Temp Voltage Laser Bias Transmit Rec LOS Transmitter
Certified (°C) (V) Current Power Power Fault
Transceiver (mA) (dBm) (dBm)
---- --- ----- ----- ------ ----- ----- --- -------
dl117 not a valid interface

MHO>
MHO> show interface dl117 xcvr_detail
dl117 not a valid interface

MHO>
MHO> show interface Sync-ext
state on
mac-addr b8:3f:d2:18:33:b2
type ethernet
link-state link up
mtu 1500
auto-negotiation off
speed N/A
ipv6-autoconfig Not configured
monitor-mode Not configured
duplex N/A
link-speed Not configured
comments
ipv4-address Not Configured
ipv6-address Not Configured
ipv6-local-link-address Not Configured

Statistics:
TX bytes:1011487183 packets:1884844 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:978883649 packets:1959606 errors:0 dropped:0 overruns:0 frame:0

SD-WAN: Not Configured
MHO>
MHO> show interface Sync-ext xcvr
Cannot get module EEPROM information: Operation not supported
Port Check Point Temp Voltage Laser Bias Transmit Rec LOS Transmitter
Certified (°C) (V) Current Power Power Fault
Transceiver (mA) (dBm) (dBm)
---- --- ----- ----- ------ ----- ----- --- -------
Sync-ext not a valid interface

MHO> show interface Sync-ext xcvr_
MHO> show interface Sync-ext xcvr_detail
Sync-ext not a valid interface

MHO>

Re: How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Thu, 28 Mar 2024 14:23:51 GMT

And yes correct, it is R81.20.

Re: How to check optical power on Maestro Orchestrators and SGMs

emmap — Tue, 02 Apr 2024 02:45:58 GMT

I think the command is under 'show maestro port X/Y/Z optic-info' or like that, tab through it and you'll find it.

Re: How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Tue, 02 Apr 2024 06:49:55 GMT

Nothing with tab neither:(

FW-MHO-1> show maestro port 1/30/1 optic-info
Physical Port: 1/30/1
Vendor Name: CP-PROLABS
Serial Number: "REMOVED"
Part Number: NA
Check Point Part Number:"REMOVED"
Enforcement: Supported
Check Point SKU: CPAC-TR-40SR-QSFP-BIDI
Material ID: "REMOVED"
Product Type: 40GBASE-SR-BiDi
Speed: 40G
FW-MHO-1>
FW-MHO-1> show maestro port 1/30/1 optic-info
FW-MHO-1> show maestro port 1/30/1 optic-info
FW-MHO-1>

Re: How to check optical power on Maestro Orchestrators and SGMs

Danny — Tue, 02 Apr 2024 07:50:36 GMT

SGMs: Transceiver & Line Card Inventory - One-liner
MHOs: Maestro Transceiver & DAC Inventory - One-liner
MHOs: Show Maestro Transceiver Status - One-liner

Re: How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Tue, 02 Apr 2024 12:22:48 GMT

Thanks Danny, however, I need it to check optical Tx/Rx power per port. With the above scripts, I only get inventory.

Re: How to check optical power on Maestro Orchestrators and SGMs

Danny — Tue, 02 Apr 2024 12:34:55 GMT

The third script runs mlxlink -d <device> -p <port> for each port.
If you dig a little deeper into the options of this command you should be able to find your solution.

Re: How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Tue, 02 Apr 2024 14:40:46 GMT

Thanks Danny, I'm able to see the tx/rx power stats per port.

Just asking myself if it could be simpler to get tx/rx power from MHO, a key check during link troubleshooting?

Re: How to check optical power on Maestro Orchestrators and SGMs

Danny — Wed, 03 Apr 2024 09:09:18 GMT

Simpler than a one-liner?

Re: How to check optical power on Maestro Orchestrators and SGMs

rahulctg — Wed, 03 Apr 2024 11:59:19 GMT

Hahaha. I meant that I used multiple commands before you proposed mxlink one(for which I do say big thanks again) while the document proposes otherwise.

Monitoring Transceivers (checkpoint.com)

Re: How to check optical power on Maestro Orchestrators and SGMs

Daniel_Szydelko — Wed, 03 Apr 2024 13:21:52 GMT

Hi,

mlxlink is described with examples in sk180812.

Daniel.