topic Re: Maestro VSX - Configure same vlan id on different bond / VS in Hyperscale Firewall (Maestro)

Maestro VSX - Configure same vlan id on different bond / VS

Cristian_F_CCSM — Wed, 14 Feb 2024 17:30:14 GMT

Hello, in a Maestro enviroment with VSX, we need to configure one bond dedicated to VS 1 (bond 1) and one bond dedicated to VS 2 (bond 2). The two bond will be connected to different network switch and these switches use the same vlan id linked to different networks.

Therefore, the follow configuration:

- VS 1 bond1.100 192.168.100.1/24

- VS 2 bond2.100 192.168.101.1/24

is fully supported with Maestro and VSX?

Thanks

Re: Maestro VSX - Configure same vlan id on different bond / VS

Dario_Perez — Wed, 14 Feb 2024 21:26:07 GMT

if you need to use the same VLAN over different VS then, create a virtual switch.

virtual switch can be leaded to "n" vs's

Re: Maestro VSX - Configure same vlan id on different bond / VS

Bob_Zimmerman — Wed, 14 Feb 2024 21:38:20 GMT

VLAN IDs are only locally significant on an interface. I know of no reason this wouldn't work.

Re: Maestro VSX - Configure same vlan id on different bond / VS

emmap — Thu, 15 Feb 2024 03:26:10 GMT

If they are different VLANs but with overlapping tags, this will work fine.

Re: Maestro VSX - Configure same vlan id on different bond / VS

Cristian_F_CCSM — Thu, 15 Feb 2024 07:28:43 GMT

Hello, in our case we can't use virtual switch feature because the vlans use the same id but are linked to different networks. Thanks

Re: Maestro VSX - Configure same vlan id on different bond / VS

Dario_Perez — Thu, 15 Feb 2024 14:22:31 GMT

if they are different segment maybe you can set one interface as access port in switch and other as vlan tag.

Re: Maestro VSX - Configure same vlan id on different bond / VS

Cristian_F_CCSM — Thu, 15 Feb 2024 15:41:53 GMT

Hello, in our case the VRF feature will be executed with CP VS.

On network switch side VRF isn't useful because we heve two different and indipendendt switches.

Regards.

Re: Maestro VSX - Configure same vlan id on different bond / VS

Dario_Perez — Thu, 15 Feb 2024 16:17:56 GMT

did you try VLAN translation? other option is pass a Access Port

Re: Maestro VSX - Configure same vlan id on different bond / VS

Cristian_F_CCSM — Fri, 16 Feb 2024 11:01:42 GMT

In our case work with access ports aren't possible because the vlan in overlapping are tens.

Regards

Re: Maestro VSX - Configure same vlan id on different bond / VS

Dario_Perez — Fri, 16 Feb 2024 14:40:30 GMT

but you say they comming from different switch no?

Re: Maestro VSX - Configure same vlan id on different bond / VS

Cristian_F_CCSM — Fri, 23 Feb 2024 15:36:56 GMT

Hello, yes I confirm