topic Migrate from dual site single MHO to dual site with two MHOs in Hyperscale Firewall (Maestro)

Migrate from dual site single MHO to dual site with two MHOs

Kilian_Huber — Thu, 18 Jan 2024 19:10:19 GMT

Greetings everybody,

has anyone done a migration from a dual site single MHO per site setup to a dual site with two orchestrators per site setup and may be willing to share a high level workflow and possible pitfalls for this? I am specifically looking for the order in which I have to configure the local sync ports on the Orchestrators and the orchestrator amount on the existing and new MHOs.

What I'm looking for would ideally be something like this document here:

https://sc1.checkpoint.com/documents/Appliances/GSG_Maestro/EN/Topics/Connecting-Cables-for-Dual-Site-Direct-Connection.htm

The procedure to migrate from Single Site to Dual Site is described very well here. Unfortunately, I did not find the same for my scenario.

Thanks!

Re: Migrate from dual site single MHO to dual site with two MHOs

Dario_Perez — Thu, 18 Jan 2024 19:23:35 GMT

I would recommended to engage Professional Services, reach your local SE.

Re: Migrate from dual site single MHO to dual site with two MHOs

Kilian_Huber — Fri, 19 Jan 2024 07:53:33 GMT

So there is basically no supported way to do this?

Re: Migrate from dual site single MHO to dual site with two MHOs

Dario_Perez — Fri, 19 Jan 2024 15:23:45 GMT

for sure it does, but is a bit complex. that's why I encourage recommend to engage Professional Services