topic Re: cpview command on scalable platforms in Hyperscale Firewall (Maestro)

cpview command on scalable platforms

Huseyin_Rencber — Mon, 18 Jun 2018 19:49:31 GMT

After R76SP.50 version cpview tool is became available. But something strange on this tool, system uptime :4908 days ??

NTP configured, output of "show uptime" is true on all sgms.

Kaspars_Zibarts — Tue, 19 Jun 2018 09:07:17 GMT

Ours on Take 62 look correct

Huseyin_Rencber — Tue, 19 Jun 2018 10:28:00 GMT

I couldn't find any info about cpview in list of resolved issues, anyway it seems solved. I will check this out after install the fix. Thanks

Gus_Schuerger — Thu, 21 Jun 2018 14:09:45 GMT

There is a file, $FWDIR/conf/fwha_ch_uptime, which stores the uptime when the first SGM in the chassis booted.

This file is cleared upon boot and then pulled during normal configuration cloning.

So if it somehow becomes wrong, it will remain wrong until one of two things happens:

1. All SGMs are rebooted simultaneously

2. Manually reset it

Try running this command from expert mode to manually reset the chassis uptime:

# cpha_blade_config reset_uptime_internal

Huseyin_Rencber — Thu, 21 Jun 2018 14:56:04 GMT

Thanks Gus, I've reset the uptime.