upgrade R76SP.30 to R76SP.50

ahmed_bousta — Thu, 13 Dec 2018 10:08:21 GMT

hello evry one i want to upgrade dual chassis 41000 run actualy R76SP.30 to R76SP.50 because R76SP.30 is end of life .

my output :

[Global] FW-VSX-ch01-01:0:ACTIVE > asg stat -v

--------------------------------------------------------------------------------

| VSX System Status - 41000 |

--------------------------------------------------------------------------------

| Chassis Mode | Primary Up (Chassis 1) |

| Up time | 273 days, 11:21:48 hours |

| SGMs | 2 / 2 |

| Virtual Systems | 9 |

| Version | R76SP.30 (Build Number 47) |

--------------------------------------------------------------------------------

| VS ID: 0 VS Name: FW-VSX |

--------------------------------------------------------------------------------

| Chassis 1 ACTIVE |

--------------------------------------------------------------------------------

| SGM ID State Process FW Policy Date |

| 1 (local) UP Enforcing Security 13Sep18 15:25 |

--------------------------------------------------------------------------------

| Chassis 2 STANDBY |

--------------------------------------------------------------------------------

[Expert@FW-VSX-ch01-01:0:ACTIVE]# cphaprob state
--------------------------------------------------------------------------------
| VS ID: 0 VS Name: FW-MAI-FRPAR-CHA-DCH-03-P |
--------------------------------------------------------------------------------
| Chassis 1 |
--------------------------------------------------------------------------------
| SGM ID State Process FW Policy Date |
| 1 (local) ACTIVE |
--------------------------------------------------------------------------------
| Chassis 2 |
--------------------------------------------------------------------------------
| SGM ID State Process FW Policy Date |
| 1 ACTIVE |
--------------------------------------------------------------------------------
[Expert@FW-VSX-ch01-01:0:ACTIVE]#

as i see on checkpoint documentation the upgrade will be done directly from the chassis. My question is the vsx and vs are managed by server management . could you please tel me if there is a required action from the server management after the upgrade from the chassis.

if you have any experiance for this upgrade you are welcom

Best regards

Re: upgrade R76SP.30 to R76SP.50

PhoneBoy — Thu, 13 Dec 2018 14:04:42 GMT

As the major version from the Check Point Security Management point of view is the same, you shouldn't need to do anything there.

Re: upgrade R76SP.30 to R76SP.50

ahmed_bousta — Thu, 13 Dec 2018 17:07:04 GMT

Think you very much for you help : could you tell me a bout downgrade from R76SP.50 to R76SP.30 .

it is mandatory to upgrade Firmware for the chassis after upgrade also .

best regards

Re: upgrade R76SP.30 to R76SP.50

Oral_Mohan — Thu, 31 Jan 2019 18:06:55 GMT

Downgrade should be done via rollback to pre-upgrade snapshot. There is no change on the mgmt side.

If you are referring to SSM firmware, keeping this to the latest version (regardless of software version) is always a good idea.

topic Re: upgrade R76SP.30 to R76SP.50 in Hyperscale Firewall (Maestro)

upgrade R76SP.30 to R76SP.50

Re: upgrade R76SP.30 to R76SP.50

Re: upgrade R76SP.30 to R76SP.50

Re: upgrade R76SP.30 to R76SP.50