topic Re: MHO-175 ports in Hyperscale Firewall (Maestro)

MHO-175 ports

John_Fulater — Thu, 08 Sep 2022 18:49:16 GMT

Hello, I was wondering if there any ports on the MHO-175 that can not be used as an uplink port. I understand the there needs to be at least 1 Mgmt port and 1 Sync for Dual MHO configurations. But can all the rest be assigned to uplink?

Re: MHO-175 ports

Chris_Atkinson — Thu, 08 Sep 2022 23:49:19 GMT

Not exactly since you still need room for some downlink ports. 🙂

On MHO-175, you can configure only these port types:

Port 1 only as management or as downlink

Ports 2 and higher only as uplink, downlink, site_sync, or ssm_sync (for intra-site sync redundancy)

Refer:

https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_Maestro_AdminGuide/Topics-Maestro-AG/Configuring-Security-Groups-in-Gaia-Clish.htm#GaiaClishConfiguringPortSettings

Re: MHO-175 ports

John_Fulater — Wed, 21 Sep 2022 20:45:33 GMT

There is a port map for the MHO-175 and it show that the dual site sync port is not available for uplink or downlink. The documentation does not state this.