topic NAT64 in General Topics

NAT64

Oscar_David_Gom — Wed, 27 Mar 2019 14:49:51 GMT

Hi, I have this topology:

Untitled Diagram.png

I need to use NAT64 (Im usign R80.20), but I dont know how to create the NAT rule, I've made the next one but it does not work.

Screenshot_1.png

Can you help me? thanks in advance.

PD: I have to attached the images because this did not let me to upload it .

Re: NAT64

Jerry — Wed, 27 Mar 2019 16:23:18 GMT

https://community.checkpoint.com/t5/General-Topics/NAT64-with-r80-20/td-p/25709

Re: NAT64

Jerry — Wed, 27 Mar 2019 16:24:47 GMT

also, as the main source:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk39374

Re: NAT64

Oscar_David_Gom — Wed, 27 Mar 2019 18:29:20 GMT

Thanks, was missing the address range in translated source, additionally it was not working because of the NDP proxy, if i can call it like that (ARP version of IPV6).

Re: NAT64

PhoneBoy — Thu, 28 Mar 2019 01:23:16 GMT

Pretty sure everyone should be able to upload and put images inline.
Will have to check.