topic Re: Core XL: Loses configuration in General Topics

Core XL: Loses configuration

Atle — Fri, 15 Mar 2019 14:23:29 GMT

Hello all.

I have seen on several different R80.x gateways that Core XL has lost its configuration. This seems to happen when you reboot or shutdown a gateway. After it is online again, I have to run cpconfig, and re-enable it. Anybody else seen this, and know why this is happening? Until now I have only seen this on virtual gateways running on Vmware ESXi or Hyper-V.

/Atle

Re: Core XL: Loses configuration

PhoneBoy — Fri, 15 Mar 2019 17:37:44 GMT

Can you describe the virtual hardware configuration of these VMs? (RAM/CPU Cores/Disk)

Never seen/heard of this happening.

Re: Core XL: Loses configuration

Atle — Mon, 18 Mar 2019 07:28:27 GMT

I have seen this several times, with different configurations. The last one was a two node Cluster XL, with 4 cores and 12 GB ram. Standard vmdk disk file. I did a shutdown of the standby member, and when I started it again, it came up with Core Xl disabled. Then it became primary, due to the fewer cores. Exactely the same happend with the other member when I did a shutdown on that one.

/Atle

Re: Core XL: Loses configuration

Petr_Frydl — Wed, 18 Mar 2020 13:57:34 GMT

Hi,

any solution found? We have same problem..

HA cluster, VE 2 cpu licenses, randomly corexl disabled on both nodes, didnt find any record in log files...ticket created today..

monitoring reported overloaded 1 cpu core so I checked the fw...

Thx

Petr