topic Re: Security Hardware Health Showing NotValidRPM and High Status in General Topics

Security Hardware Health Showing NotValidRPM and High Status

Di_Junior — Fri, 05 Oct 2018 17:44:18 GMT

Dear Mates,

I have noticed today the hardware health of one of our critical security gateway is showing NotValidRPM, and High Status. I would like to know what could be the cause of this, and how it could be overcomed.

Output of show sysenv all command

Output of cpstat -f cpu os command

Thanks in advance.

Re: Security Hardware Health Showing NotValidRPM and High Status

Vladimir — Fri, 05 Oct 2018 18:01:28 GMT

Run into similar issues before. Ended-up RMAing the units.

I'd suggest to have a TAC case opened and let them pock around a system to verify that this if it is a hardware responsible for processing sensor inputs that got borked.

Re: Security Hardware Health Showing NotValidRPM and High Status

JozkoMrkvicka — Fri, 05 Oct 2018 21:11:10 GMT

Is output of

cpstat -f sensors os

the same ?

What kind of appliance it is ? GAIA R77.30 version ? Do you have latest Jumbo installed ? Something strange in /var/log/messages ?

Do you have LOM ? In LOM, you can also see some sensors data, try to check it via LOM.

Do you have physical access to this machine ? Maybe AC is corrupted, a lot of dust, heavy things placed on the appliance, etc. ...

Have a look:

"show sysenv all" command shows "NotValid" in the "Value" column for "SAM", "NPU" and "SAM Fan" sensors, although SAM ca…

Hardware Sensors on 15000 and 23000 appliances show zero (0) values after completing the Gaia OS First Time Configuratio…

Re: Security Hardware Health Showing NotValidRPM and High Status

Di_Junior — Mon, 08 Oct 2018 13:11:43 GMT

Here is the output of cpstat -f sensors os.

It is a 21800 appliance, running R770.30, and latest jumbo.