topic Re: BGP Route issue on 1430 appliance in General Topics

BGP Route issue on 1430 appliance

Scott_Bily — Tue, 27 Feb 2018 02:35:32 GMT

Is there a way that dynamic BGP route could be the prefered route over a physically connected route? This is happening on one on my gateways. I cannot establish a BGP neighbor to the physically connected switch, because the traffic is following the default route (learned thru BGP)out a VPN interface. I can verify this by doing a traceroute to the ip of the connected switch. But am looking for some guidance on how to troubleshoot. This is also on a 1430 SMB appliance so its not easy to see the BGP configuration.

Re: BGP Route issue on 1430 appliance

G_W_Albrecht — Tue, 27 Feb 2018 14:27:33 GMT

> This is also on a 1430 SMB appliance so its not easy to see the BGP configuration.

You do know the CLI commands to use here, as found in Check Point 600/700/1100/1200R/1400 Appliance Guide Advanced Routing p. 6 - 32 ?

Re: BGP Route issue on 1430 appliance

Scott_Bily — Wed, 28 Feb 2018 04:02:50 GMT

Yes thank you, I have been thru that guide. I have a ticket in with TAC. .

Re: BGP Route issue on 1430 appliance

G_W_Albrecht — Wed, 28 Feb 2018 07:54:38 GMT

That is the most sensible thing to do in such a case - Advanced routing is a rather very advances topic 😉