topic Re: ACTIVATION LICENSE in General Topics

ACTIVATION LICENSE

Yanick_DJINZOU — Fri, 25 Jan 2019 13:51:02 GMT

Hello Dear,

I am newcomer with the CheckPoint Solutions and It’s my first time to activate the license but the others config are OK because I worked on the Cisco products.

I tried to activate the license on the CP Appliance 3100 but I am confused just a bit. Please this is the information

IP Mgmt : 192.166.1.1

IP add br : 10.5.1.86 to access to Internet

IP WAN on Router(Provider) : 100.235.105.153

NB : the CP Appliance 3100 Behind the fortigate and to generate the license on the usercenter.checkpoint.com/usercenter the IP add I put is the IP WAN 100.235.105.153.

Brief you can see the information and the errors on the files attached.

1-Which IP add must I put when I fill the form to generate the activation file ?

IP add br : 10.5.1.86 or IP WAN on Router : 100.235.105.153

2- Which is the problem ?

Thank you for all.

Re: ACTIVATION LICENSE

Mark_Mitchell — Fri, 25 Jan 2019 14:23:20 GMT

Hi Yanick,

The 3000 series appliance will use Central licensing to activate the license. Because of this the IP address on the license will be the IP address of the management server. If you are using gateway and management server on the same machine you could just use the management interface IP address and then add the license via SmartUpdate.

I would use the IP address for the license of whichever interface you have set as the Mgmt interface. The mgmt interface necessarily doesn't have to be the physical interface that is marked as Mgmt. The management interface can be changed via Gaia.

Hope this helps.

Cheers

Mark

Re: ACTIVATION LICENSE

Jovani_Patterso — Fri, 25 Jan 2019 14:45:11 GMT

To keep things simple, I'd recommend taking the following steps:

1. Regenerate your license from usercenter using the IP of the Management interface (192.168.1.1) and download the license file

2. Open up SmartUpdate, navigate to the licenses and contracts tab and detach the license previously attached

3. Attach the new license, and update contracts.

This should resolve your issue. Let us know if that helps.

Jovani

Re: ACTIVATION LICENSE

RickHoppe — Sat, 26 Jan 2019 05:45:21 GMT

For more information, please check the Check Point License Guide. https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk11054

Re: ACTIVATION LICENSE

PhoneBoy — Sat, 26 Jan 2019 06:38:17 GMT

Did you "activate" the license for the 3100 using the First Time Wizard when setting up the appliance?

Or what exact steps did you follow to get to this state?

In general, the license should be associated with one of:

Management IP (a so-called "Central" license)
The appliance itself (a "Local" license with the device MAC address listed as a "feature")
An IP address associated with the Gateway (a "Local" license)

Re: ACTIVATION LICENSE

Yanick_DJINZOU — Sat, 26 Jan 2019 12:20:38 GMT

Thanks to you Mark for your reponse

Re: ACTIVATION LICENSE

Yanick_DJINZOU — Sat, 26 Jan 2019 12:23:31 GMT

Thank you I understood well, It's ok

Re: ACTIVATION LICENSE

Yanick_DJINZOU — Sat, 26 Jan 2019 12:25:05 GMT

Great I am very happy to work on the Checkpoint solution

Re: ACTIVATION LICENSE

Yanick_DJINZOU — Sat, 26 Jan 2019 12:33:01 GMT

Apfter using the First Time Wizard when setting up the appliance I wanted to activate the license but I took the ISP IP add but now I understood I think, I am going to try

Re: ACTIVATION LICENSE

Yanick_DJINZOU — Sat, 26 Jan 2019 12:37:38 GMT

Thanks for all but after the activation of the Apliance, is possible to change the ip address I have used for the activation and put another network(IP add) or this address (The first IP add) is bind with the SmartConsole for the Mgmt?

Re: ACTIVATION LICENSE

PhoneBoy — Sat, 26 Jan 2019 19:12:08 GMT

Technically, as long as the IP of the license matches an IP on a gateway interface (or the management IP) it is fine.

If you need to relicense, Account Services can help.

Contact Support | Check Point Software