topic how to get new interface for DMZ into smartdashboard cluster member group in General Topics

how to get new interface for DMZ into smartdashboard cluster member group

Lijo_mathai — Wed, 16 May 2018 04:04:22 GMT

Hi,

I want to add a new interface for DMZ network, the interface is already configured in GAiA, now i need to get this interface into cluster_member group configured in dashboard, i believe 'get all members interfaces' will help me to get the interface into group, but i worry will it impact my existing interfaces/topology.

Any wise suggestion pls

Thanks

Re: how to get new interface for DMZ into smartdashboard cluster member group

ED — Wed, 16 May 2018 06:35:09 GMT

Hi,

You can use "Get interfaces without topology". If you don't see that option in SmartConsole R80, then you might have an old build of SmartConsole.

To make sure nothing changes you can add it manually. In SmartConsole:

Network management -> Actions -> New interface.

Network type -> Cluster

Virtual IPv4 -> IP address of the cluster for your DMZ

Members IPs -> Modify -> IP address of your GW's IP address for your DMZ

Re: how to get new interface for DMZ into smartdashboard cluster member group

Laxi_D — Wed, 16 May 2018 18:18:55 GMT

get all members interfaces is worked for me but don't use get all members interfaces with topology

Re: how to get new interface for DMZ into smartdashboard cluster member group

Lijo_mathai — Thu, 24 May 2018 02:55:52 GMT

Hi,

I observed the issue is lying in GAiA console, the interface i added is not populated in GAiA itself which is a reason i believe causing SMARTDASHBOARD unable to pull the topology for that new interface.

In my HA pair one box is able to populate the directly connected routes whereas the second one is unable to!

Can this be a bug? Or is there any setting that i am missing.

Thanks