topic Re: R81.20 Take 70 - API readiness test failed in General Topics

R81.20 Take 70 - API readiness test failed

FireMage — Mon, 15 Jul 2024 08:04:43 GMT

Hello everyone,

i know the take is not yet released. but all the positive reports have prompted me to install it anyway.
unfortunately this has not been a success so far. i get the same problem on 2 different vm's:

- the installation went without error and after the restart i could not find any error in the function in general

BUT

i then tried to log in via smart dashboard, which did not work.

Cause:
the api service has a problem

i have already tried several things and also searched the internet. unfortunately without success.

should i forget the whole thing for now and wait for the release or do you have an idea?

thanks
jeff

Re: R81.20 Take 70 - API readiness test failed

the_rock — Mon, 15 Jul 2024 14:04:51 GMT

I installed it on 5 lab devices and no issues, 2 of them mgmt servers. Can you run below command?

watch -d $FWDIR/scripts/./cpm_status.sh (ctrl+c to stop)

Andy

Re: R81.20 Take 70 - API readiness test failed

FireMage — Mon, 15 Jul 2024 14:56:45 GMT

hi andy,

looks good:

Check Point Security Management Server is running and ready

thx

jeff

Re: R81.20 Take 70 - API readiness test failed

the_rock — Mon, 15 Jul 2024 14:59:27 GMT

I know sometimes api may take bit of time to show successful, so can you try again? If you are able to, we can do remote later to check.

Andy

Re: R81.20 Take 70 - API readiness test failed

FireMage — Tue, 16 Jul 2024 12:20:19 GMT

Yes, you are right. after approx. 6h the api service is successfull.

thx

jeff

Re: R81.20 Take 70 - API readiness test failed

the_rock — Tue, 16 Jul 2024 13:37:54 GMT

That is NOT normal. Longest I saw take is 10 mins.

Andy

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sat, 20 Jul 2024 13:17:09 GMT

I find myself in same situation for the lab mgmt, so let me see what happens, I will NOT restore from backup again, which I know would work, as I did it yesterday, so will leave it as is for some time with api test showing failed and see what happens.

Andy

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sat, 20 Jul 2024 13:22:01 GMT

I installed jumbo 70 on my lab mgmt again, booted at 9.10 am EST, so let me keep an eye on it and see if API ever starts up : - )

Andy

Re: R81.20 Take 70 - API readiness test failed

fabionfsc — Sat, 20 Jul 2024 16:09:10 GMT

Can you send the output from the command bellow?

cat $MDS_FWDIR/conf/cpmServerSettings.props

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sat, 20 Jul 2024 16:42:50 GMT

@FireMage

I think based on my testing, I am fairly sure this is jumbo 70 issue and here is why I say that...check out steps I did:

-due to lab mgmt having to be shut down in eve-ng, when it came back, api could never start (or I did not wait long enough, not sure, though this NEVER happened before with any other jumbo)

-I decided to restore backup from July 4th, which worked fine and API started right away

-then (July 20th), I upgraded to jumbo 70 again and ran another backup

-rebooted, api did not start even in 1 hour

-restored the back up again from July 4th, no issues

-upgraded again to jumbo 70, rebooted, took some time around 3 hours for API to start

Andy

Re: R81.20 Take 70 - API readiness test failed

Natan_Chamilevs — Sun, 21 Jul 2024 06:52:12 GMT

Hi @the_rock,

Is Compliance blade enabled in these Management machines?

Unfortunately, we've found an issue in the latest released takes (R81.20 JHF take 70, R81.10 JHF take 152, R81 JHF take 99) where FWM might terminate unexpectedly repeatedly, which makes the Management Server unresponsive, when Compliance blade is enabled.

The reason for the issue is changes made in the scheduling mechanism of the full scan of the Compliance blade.

The workaround can be found sk182507, and we plan to release Jumbo HF takes in the upcoming week with a solution for this issue.

We are truly sorry for the inconvenience.

Natan

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sun, 21 Jul 2024 14:39:34 GMT

Hey mate,

Dont be silly man, what inconvenience, its a lab, all good, haha : - )

Btw, in eve-ng, literally any vendor (CP, FGT, PAN, Trend Micro, Cisco, Aruba, Sophps and so on) takes 5 mins to spin up a lab, so no sweat.

Anywho, to answer your question, no compliance blade was enabled, I enabled it AFTER installing jumbo 70, but then again, issue was there WITH jumbo 70 and NO compliance blade on. I did see sk you mentioned, definitely matches.

For now, I got working backup and I did leave jhf 70 installed, so will wait for new one.

Thanks again @Natan_Chamilevs

Andy

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sun, 21 Jul 2024 15:51:37 GMT

@Natan_Chamilevs

Quick update...I ended up installing jumbo 76 (I see just came out today) in my R81.20 labs (with single gw, cluster and dedicated SE server), no issues, API started right away...cheers 🙂

Andy

Re: R81.20 Take 70 - API readiness test failed

FireMage — Sun, 21 Jul 2024 20:12:26 GMT

Hello everyone,

thank you for your efforts and the investigations. i was away from the site over the weekend, so i can only get back to you now.

yes, the compliance blade is active on all systems.

thanks again to everyone involved. now i can probably install the update.

see you soon
jeff

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sun, 21 Jul 2024 20:13:35 GMT

I can confirm Jeff its good, tested in my lab.

best,

Andy

Re: R81.20 Take 70 - API readiness test failed

the_rock — Sun, 21 Jul 2024 20:25:33 GMT

As a matter of fact, since I wanted to test importing policy from customer's mgmt migrate server into my lab, I spun up brand new R81.20 mgmt, "slapped" jumbo 76 on it, rebooted, ran migrate server import, rebooted, api came up literally in 25 seconds.

Andy