topic Configuring MP-BGP and OSPF for each seperated VS in clustered VSX 6700. in General Topics

Configuring MP-BGP and OSPF for each seperated VS in clustered VSX 6700.

febrarylin — Thu, 18 Jan 2024 09:38:49 GMT

Hi guys.
I have run in to the situation with several virtual systems in clustered VSX 6700, and where MP-BGP and OSPF should be deployed on each virtual system. How could I implement the routing? via CLI or GUI? and if there is some document or notes for reference?

Regards

Re: Configuring MP-BGP and OSPF for each seperated VS in clustered VSX 6700.

Chris_Atkinson — Thu, 18 Jan 2024 11:51:16 GMT

Dynamic routing configuration for VSX is CLI based.

Refer to the Advanced Routing Admin Guide for your version as a reference.

Re: Configuring MP-BGP and OSPF for each seperated VS in clustered VSX 6700.

febrarylin — Fri, 19 Jan 2024 10:10:11 GMT

Hi Chris_Atkinson, thanks for helpful message.

And in my case, oppf+vrf would be deployed for virtue system and seperation. I wonder how to implement the configuration.

Regards

Re: Configuring MP-BGP and OSPF for each seperated VS in clustered VSX 6700.

Chris_Atkinson — Fri, 19 Jan 2024 11:08:26 GMT

Would suggest to work with your local CP office to seek the assistance of PS for your project.

Note on your deployed virtual systems you will need to ensure that the security policy allows the routing protocol communications (sk39960).