Routing when getting ip from Office mode

Railx — Tue, 03 Oct 2023 06:58:15 GMT

When receiving an IP address from the Office Mode address pool, very strange routes are written to our machine:
*.*.0.1 255.255.255.255 *.*.101.35 *.*.101.36 1
*.*.0.2 255.255.255.254 *.*.101.35 *.*.101.36 1
*.*.0.4 255.255.255.252 *.*.101.35 *.*.101.36 1
*.*.0.8 255.255.255.248 *.*.101.35 *.*.101.36 1
*.*.0.16 255.255.255.240 *.*.101.35 *.*.101.36 1
*.*.0.32 255.255.255.224 *.*.101.35 *.*.101.36 1
*.*.0.64 255.255.255.192 *.*.101.35 *.*.101.36 1
*.*.0.128 255.255.255.128 *.*.101.35 *.*.101.36 1
*.*.1.0 255.255.255.0 *.*.101.35 *.*.101.36 1
*.*.2.0 255.255.254.0 *.*.101.35 *.*.101.36 1
*.*.4.0 255.255.252.0 *.*.101.35 *.*.101.36 1

These are just some of the routes.

Can you please tell me where these routes come from and if we can change them in any way? The static routes on the gateway simply describe our two networks, one of which includes our Office Mode.

Re: Routing when getting ip from Office mode

PhoneBoy — Tue, 03 Oct 2023 15:12:50 GMT

When you connect via Remote Access, we create a number of routes to ensure traffic destined for the encryption domain is actually routed over the VPN tunnel interface.
When your local (as in LAN or WiFi) IP address is included in the encryption domain, a number of non-overlapping routes are created instead.
This is expected behavior and there is no mechanism to customize this that I'm aware of.

topic Routing when getting ip from Office mode in General Topics

Routing when getting ip from Office mode

Re: Routing when getting ip from Office mode