Features enable using SmartConsole R81.10

Shaila — Thu, 03 Aug 2023 05:21:32 GMT

Hi,

I want to configure below recommendations

Anti-Virus blade is configured based on the Check Point's "Recommended_Profile" or "Optimized Profile".
Enable the "Archive scanning" in Anti-Virus blade (in the Threat Prevention profile).
Enable the HTTPS Inspection feature to inspect HTTPS traffic.

any reference to do these step by step? i'll be doing it using SmartConsole R81.10.

Re: Features enable using SmartConsole R81.10

Tal_Paz-Fridman — Thu, 03 Aug 2023 10:29:57 GMT

1| You will first need to enable the Anti-Virus blade on the Security Gateway object - General Properties topic. Either enable each specific blade or Autonomous Threat Prevention.

2| Then go to - Security Policies > Threat Prevention > Custom Policy Tools > Profiles. Check the profile you would like to use and check the relevant settings for Archive scanning

Make sure the Threat Prevention Profile is used in Threat Prevention Policy

3| To use HTTPS Inspection enable it on the Security Gateway object (HTTPS Inspection topic)

topic Re: Features enable using SmartConsole R81.10 in General Topics

Features enable using SmartConsole R81.10

Re: Features enable using SmartConsole R81.10