topic Re: Configuring ISP Redundancy mode Load Sharing in General Topics

Configuring ISP Redundancy mode Load Sharing

Oliver_222 — Thu, 27 Jul 2023 10:54:58 GMT

Could you please tell me how to correctly configure ISP Redundancy mode Load Sharing?

Do I need to change NAT rules somehow? Do I need to add routes?

Previously we had Primary/Backup mode. And when one of the ISPs failed, the default route was changed.

We switched the mode to Load Sharing and the default route was on one ISP. Judging by the logs, Internet access was not performed correctly. Users were going according to the NAT settings. We did not find any distribution by ISPs.

Re: Configuring ISP Redundancy mode Load Sharing

PhoneBoy — Thu, 27 Jul 2023 13:57:14 GMT

Possible this might help: https://support.checkpoint.com/results/sk/sk105239

Re: Configuring ISP Redundancy mode Load Sharing

the_rock — Thu, 27 Jul 2023 14:06:50 GMT

https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_SecurityGateway_Guide/Content/Topics-FWG/ISP-Redundancy-Configuration.htm