topic Re: R80.40 Upgrade device in standalone in General Topics

R80.40 Upgrade device in standalone

v1K1 — Sat, 12 Nov 2022 03:51:40 GMT

Hi Team,

I have upgrade my vsx cluster running 2 virtual machine (both in HA) FROM 80.30 to 80.40. I have followed the upgrade using cli.

Post successfully upgrade, The standby device went to the standalone mode and lost the connection to active device.

Any help is appreciated.

Re: R80.40 Upgrade device in standalone

Chris_Atkinson — Sun, 13 Nov 2022 01:54:04 GMT

Standalone is usually a term implying management and gateway functions run on the same machine, not something that is supported with VSX. Do you mean active / active or some other cluster state?

With that said please review the following and if your problem persists please investigate further with TAC.

sk174510, sk42096, sk169777

Re: R80.40 Upgrade device in standalone

v1K1 — Sun, 13 Nov 2022 03:59:19 GMT

The issue i experiencing was after upgraded one of the vsx gateway to r 80.40 the device booted with ready mode instead standby mode.

ha configure : yes

Re: R80.40 Upgrade device in standalone

Chris_Atkinson — Sun, 13 Nov 2022 04:51:44 GMT

That makes more sense, this SK is the place to start in that case.

sk42096: Cluster member is stuck in 'Ready' state

Re: R80.40 Upgrade device in standalone

v1K1 — Mon, 14 Nov 2022 00:50:24 GMT

Thank you @Chris_Atkinson. Its resolved my issue