topic Re: Impact of Disconnecting Sync Interface of VSX Cluster (in maintenance window!) in General Topics

Impact of Disconnecting Sync Interface of VSX Cluster (in maintenance window!)

manny799 — Mon, 10 Jan 2022 09:21:06 GMT

Hi there,

We have a VSX cluster running r80.30 which consists of two members running VSLS, we are looking to add a third member in the future so need to move the single crossover cabled based sync interface to go via switches.

When we disconnect the sync interface (in a maintenance window), what impact should we expect to see? Would the Active VSs go to "Active Attention" and the Standby VSs go to state "Down"? Basically I need to know if there will be production impact to doing this (I don't _think_ there will!).

Thanks,

John M

Re: Impact of Disconnecting Sync Interface of VSX Cluster (in maintenance window!)

_Val_ — Tue, 11 Jan 2022 10:17:22 GMT

Yes, it should not cause failover, but the sync obvious will not work. To avoid any unnecessary disturbance, I would recommend pushing all activeV Ss on the same VSX physical before disconnecting sync, just in case. You can just run cpstop on one of the members to achieve that.

In any case, announce service window with a short interruption, that helps covering unexpected issues. No interruptions should happen if everything is done correctly, though.

Re: Impact of Disconnecting Sync Interface of VSX Cluster (in maintenance window!)

manny799 — Tue, 11 Jan 2022 11:10:55 GMT

Thanks for confirming, that's pretty much as I expected 😊