topic Re: Modifying VLAN-ID on existing vsx cluster in General Topics

Modifying VLAN-ID on existing vsx cluster

abhinaw — Tue, 05 Oct 2021 11:32:54 GMT

Hi ,

we have a existing running vsx cluster , we need to modify the existing vlan say bond0.123 to vlan 321 like bond0.321 . How we can do this and what are the steps to be followed.

If its normal gateway firewall i understand we can delete the interface from cli and then reconfigure the new interface but in vsx what would be the steps.

Any guidance is much appreciated.

Regards,

Abhi

Re: Modifying VLAN-ID on existing vsx cluster

_Val_ — Tue, 05 Oct 2021 14:06:42 GMT

On VSX, you manage VS topology from the SmartConsole. All interfaces can be updated there directly. Look into the admin guide for details

Re: Modifying VLAN-ID on existing vsx cluster

abhinaw — Tue, 05 Oct 2021 14:20:22 GMT

Thank You Val !

So does it means we can directly modify the vlan tag (eg from bond0.123 to bond0.321 ) in the topology section from smart console and save it .

No need to login to cluster firewall ?

Re: Modifying VLAN-ID on existing vsx cluster

_Val_ — Tue, 05 Oct 2021 14:38:48 GMT

No, you will have to remove the old interface and add another one, with a different VLAN tag. That, however, can be done in one push.

Do not forget to push policy after making changes.