topic Re: Internal system error in HTTPS Inspection (Error Code: 2) - after Vsec Gateway Upgrade ro R80.40 in General Topics

Internal system error in HTTPS Inspection (Error Code: 2) - after Vsec Gateway Upgrade ro R80.40

Neil_ARZ — Fri, 12 Feb 2021 16:03:43 GMT

HI Checkmates,

Good Day,

We had an initiative to upgrade our R80.10 Checkpoint Mgmt / Gateway to R80.40.

The mgmt upgrade went well.

The vsec Gateway also went fine but ,

However, In the logs we noticed an Internal system error in https Inspection blade.

Internal system error in HTTPS Inspection (Error Code: 2) - this stops the https inspection for our inbound traffic going to a server

it became bypass. No change our rules and we tried to reinstalled it but still failed.

Anyone has experienced this?

Our deployment is the GCP , Google Cloud. - Distributed - Open servers

We made a fresh install , we introduced new VM with new version.

The latest hotfix was also installed for both. Take 91

Re: Internal system error in HTTPS Inspection (Error Code: 2) - after Vsec Gateway Upgrade ro R80.40

PhoneBoy — Sat, 13 Feb 2021 03:14:45 GMT

There are a couple of potential reasons for this error, but you need to do some troubleshooting.
Start with: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk112066

Re: Internal system error in HTTPS Inspection (Error Code: 2) - after Vsec Gateway Upgrade ro R80.40

Bryce_Halkersto — Wed, 30 Jun 2021 13:25:33 GMT

All,

I run into the same issue after upgrading to R80.40, however, are issues were slow web responses over VPN's (would take 12-20 seconds for sites to load). Had to put a https inspection IKE bypass rule in to resolve issues.

Bryce