topic Re: R81 DemoPoint not starting Windows-client in General Topics

R81 DemoPoint not starting Windows-client

EduAQA — Mon, 17 May 2021 17:38:57 GMT

Does anybody was able to start the Windows-Client machine from jump server?

I'm not able to RDP to client machine ... timeout, like been not available anymore

Re: R81 DemoPoint not starting Windows-client

PhoneBoy — Tue, 18 May 2021 01:41:52 GMT

@Ofir_Shikolski can you look into this?

Re: R81 DemoPoint not starting Windows-client

Ofir_Shikolski — Tue, 18 May 2021 11:02:57 GMT

please check if your RDP connect is blocked by your security device / ISP .

Re: R81 DemoPoint not starting Windows-client

EduAQA — Tue, 18 May 2021 11:23:00 GMT

blocked RDP? let me explain better:

I'm going to the online lab, using browser, and then from the jump server (inside the lab), I'm trying RDP to the windows client (also inside the lab)

So, I'm not doing RDP from my network to the online lab.

Re: R81 DemoPoint not starting Windows-client

EduAQA — Tue, 18 May 2021 11:44:20 GMT

Adding some more information

The firewall R81 of the lab, does not detect any traffic from the jump-server (10.128.0.7), and almost make sense because it's on the same network as the external port of the firewall. The "End User Host 1" (192.168.101.5) is on a different network as should ... the gateway for the jump-server is 10.128.0.1 ... so maybe the gateway 10.128.0.1 don't know that network 192.168.101.0/24 is behind the firewall and does not route the traffic accordingly

Or maybe it's just me that doesn't know how to use the environment correct.

Re: R81 DemoPoint not starting Windows-client

Ofir_Shikolski — Wed, 19 May 2021 07:34:28 GMT

Access to the environment :
RDP to jump-server or HTTP to guacamole

The lab is from win-victim to the interment and not for the jump-server.
The jump-server is for management access , use the Mobaxterm to connect.
Cookbook : https://supportcenter.checkpoint.com/supportcenter/portal?action=portlets.DCFileAction&eventSubmit_doGetdcdetails=&fileid=111525

Re: R81 DemoPoint not starting Windows-client

EduAQA — Wed, 19 May 2021 19:57:18 GMT

Thanks for try to help, I have the documentation from the training session we did a few weeks ago

But, I'm not able to match the documentation with the Labs site itself, just as example it says that jump-server has interface for the 3 192.168.x.x network, however the jump-server 10.128.0.7 as described on the page of the lab where we start the VMs

Does anyone else have the simple steps to tell me how to reach the Windows-Client machine on the network 192.168.101.0 ... On the firewall there are zero traffic from any network 192.168.x.x

If somebody can give the steps I appreciate.