topic Re: public SSH keys for remote hosts on Gaia R80.40 and higher in General Topics

public SSH keys for remote hosts on Gaia R80.40 and higher

Alan_Dressner1 — Thu, 08 Apr 2021 19:17:01 GMT

I need to setup a Weekly OS backup on a 3100 appliance. In the Gaia portal page I go through the steps of creating a scheduled backup. After I add all the requires information I hit OK and then I receive a pop up stating that this host is not trusted.

The fingerprint provided is different than the fingerprint that is generated when I connect manually via SCP to the backup server. If I run 'show ssh hba all' the host is known and the SHA-256 fingerprint is known. I am able to manually run sftp or scp to the server without issue. In the Gaia portal page I am given a different fingerprint.

I am not sure how to proceed. The portal page will not allow me to proceed with a scheduled backup.

Re: public SSH keys for remote hosts on Gaia R80.40 and higher

PhoneBoy — Thu, 08 Apr 2021 20:59:31 GMT

Is the correct fingerprint shown if you try to connect from the CLI of the gateway?

Re: public SSH keys for remote hosts on Gaia R80.40 and higher

Alan_Dressner1 — Fri, 09 Apr 2021 14:09:55 GMT

Yes, from CLI the correct fingerprint is shown.

Re: public SSH keys for remote hosts on Gaia R80.40 and higher

PhoneBoy — Fri, 09 Apr 2021 15:55:16 GMT

I recommend a TAC case.
Both the CLI and the WebUI should be returning the same fingerprint.